From Trash to Basement Built-in

I was at one of the architectural salvage places in the SODO area of Seattle one fine summer day 3 years ago and as I was leaving with whatever small treasure I had found (picture Sméagol with his Precious…), I spied a bit of white cabinetry and what looked like a paneled cabinet door in their free/meant-for-the-dumpster pile so I went over and looked to see if I could salvage a bit of whatever it was.  The hope was for a door that I could re-purpose or some cool hardware left intact, but I struck gold!  Some idiot used a pry-bar and a Sawzall to rip a built-in painted hutch out of a house’s wall during a remodel.  It was taken to the salvage shop without a back, one side missing, no top, zero trim left, and with rough recent tool/pry marks all over it.  All the shelves were there and the door that I had seen was one of four heavily painted paneled oak doors.  I saw some promise and had an exact spot for it, so I piled the wreckage in the back of my truck, roped it down, and sped away before someone could tell me no.

It languished in the basement for part of a year before I tightened the joints, squared it all up, made a back from pine bead-board, built a matching side panel, reinforced the structure and installed it on one of our basement den walls.  What used to be the open counter-top space between the original built-in base and top, became storage for boots or snowboards or books (which is what is there now).

I wanted to include Stamp-With-Foot in the project, so I took her with me to pick out some trim.  She found a section of fancy scalloped-cut chair rail/case molding that she REALLY liked and I went home and used it in a custom buildup: adding a section of ripped down base molding and a length of popular wood that I ran over with two different router bits to make the top trim.

After getting the piece installed, I realized that I would have a 5″ gap of dead space between the inside top of the cabinet and the finished top, so I rabbited in two shelf lips and built matching hatch covers to provide storage for long or seldom used items in the top of the cabinet.  The hatches were finished with brass ring pulls from a local boat supply hardware shop.  After some light sanding, Stamps-With-Foot and I put two coats of white cabinet paint on it and I had The Ruminator help me install antiques glass pulls and keyed latches while he was visiting for Christmas.   The piece looks like it was built with the house, the top is already filled with mountaineering books, and is a fantastic addition to our basement and home.

Leave a Reply

Your email address will not be published. Required fields are marked *