Earlier this year, while we were finishing the attic, I took a weekend and built a cherry and ash laminated canoe paddle at the Camp Beach Center For Wooden Boats shop – as my own wood shop was in full use for the attic/storage. It was a little bit of a rush build and after paddling with it once, I decided to rebuild and reform it into a better performing paddle. This video will take you through all the steps of the initial build and the refit. The next video in in this series will show the finish steps and some on-water testing.
Tag: Craftsmanship
House Painting – Attic Installment
I documented the process to paint the attic conversion that we have spent a couple of months working on. I am using a Graco airless spray rig that I bought a few years ago at a big box store. It has paid for itself MANY times over. This is part 1 of a 2 part video series. In this one, I sprayed the drywall primer and the trim paint. For paint I only use Benjamin Moore. It is my favorite to use and it wears amazing – not cheap though. Wear your mask and keep your lungs healthy!
Catching up and writing more
I have not been writing as much in the last few months as I should. I have lots of excuses:
- House Remodel
- Hectic Work Schedule
- Jeep Rebuild
- A focus on film making and growing my YouTube presence
- Lawn and Garden care – seriously, this takes up a lot of my time.
- Too much TV and interwebs…
- Blah, Blah, Blah…
When you get to the base of it all though, the answer is that I have made time for all the other things that keep me sane/make me crazy except for writing. I am renewing my focus and will be posting more words to go along with all of the pictures and video.
Let’s start with an update of current stuff:
The Attic
We are so close to being done with the attic conversion. I have to put a couple of coats on the closet door and one on the stair railing and paint the 4 walls with a couple coats of the almond eggshell that my wife picked out. The new hardwood flooring is being delivered today and it will be installed on Friday. I will spend the weekend installing the stair treads and kickers/risers. The receptacles, switches and lights are the last serious items that will go in before I touch-up a little paint here & there and I will be done and can focus on the basement.
Basement
We are 75% there. All tiled laid, grout done and a functioning toilet!! I need to finish the trim install, hang two doors and then paint EVERYTHING! I am having a custom shower rod TIG welded together and will be building the double sink vanity. I have to tack together & paint the medicine cabinet door and mirror frames as well. After all is in, we will have a plumber come out for the sink install and shower hook up. I don’t plumb. I am afraid of flooding my house with water or sewage. I leave that job to the professionals.
Main Level Bath
The tube tile surround is being replaced in two weeks with 6” subway and small hex tile. The new bathroom mirror will be going in this week, and I have to have the exhaust fan switch rewired.
Jeep
I had a solid weekend working on the Jeep. The taillights are installed, the winch is re-wired, mirrors installed, windshield back on with new gasket and PLENTY on extra silicone. The upper KC spotlights are re-installed, and an issue with the front speakers if fixed. I still need to paint and install the spare tire rack, as well as the CB, megaphone speaker, 2nd battery, air compressor, lower KC spot lights, passenger headlight, rub rails, whip antenna, headlight trim rings, and polish the rear tube bumper.
The current plan is to leave the top COMPLETELY off until fall when I re-install the soft top. I need to finish the Hi-Lift Jack rebuild project, have the speedometer serviced, and replace my tube pads as well before the cold winter wind blows.
Garage
The shop of me dreams is packed full of everyone else’s crap right now. It is all leaving by the last weekend in July if I have to put it all out on the road. I need to finish wiring in my 40K lumens of LED lighting, a 50AMP plug, a couple of 220/30amp plugs and have an electrician connect all into my service panel.
House Exterior
- Downspout in back needs attention
- A section of soffit need looking at and possibly repaired
- I need to weld together the Juliet Balcony outside the dining room
- Weld railing for rear steps
- The new front windows need a little trim and paint
- Dining room window needs trim and paint
- The rear steps need to be painted
- The chimney needs to be repointed before fall/winter
- Basement railing needs to be installed
- Both front railings need to be sanded and repainted.
- External security alarm siren need to be installed
- A tiny bit of concrete need to be pouted
- Two security cameras need to be swapped out for the lower profile ones
The yard
Man, the front yard is good, a little weeding and bush trimming maybe. The back yard though… It is still a disaster, or at least ½ a disaster. I want to fill 3-4 gabion baskets with all the rocks left over from a previous owner’s attempt at pond-scaping and make benches around out fire pit. We will be adding a steel arbor from the garage to the patio this fall that I am welding up on-site. The patio table and chairs will get a proper sanding and oiling this weekend and we need/want an umbrella of it this year. I want to add a tool shed and additional firewood racks to the side yard. And finally, the small yard next to the garage is my makeshift apiary and I would like to make that both permanent and presentable with some additional hives, gravel and flower plants in narrow garden boxes.
Health
Stamps-With-Foot, my mom, and the kids are good. I am feeling all of my 40+ years lately though. My hip is still painful a full year after reconstruction. I may have torn the meniscus in my left knee, AND I have Fucking Tennis elbow from chopping firewood!! Not being able to run and bike, coupled with my love of cookies, has left me with a classic “Dad-bod” and even my fat pants are tight right now. Eating better now. Trying to get between 7 and 10K steps in a day, having the knee looked at, and working on the elbow. We are going to Hawaii in February and I need at least a 2-pac as there will be MANY shirtless days in and under the water, for my arm to feel better, and my knee and hip to be like 70%.
Other
Work is work, but I have really traveled at all this year and that is awesome! Still wish I was building cabinets for a living, covered in man-glitter, smiling but that will have to wait. I will be traveling to Arkansas this fall to see my daughter and her family. My son will be here in Seattle for a couple of weeks this summer. I hope to tour a couple of colleges with him. My wife and I have a couple of road trips planned and I want to get out on my bike, kayak, and skate board a little (don’t tell my wife or knee Dr. about the board…) I have started recording for a monthly Podcast. A friend conned me into it after a few years of asking. I am going to just sit and tell stories without naming names or implicating myself in any illegal activities that are not past the statute of limitations. As a reward for losing weight I will go ahead and finish out both of my tattooed arm sleeves and my wife and I are planning matching bee tattoos for our anniversary. I still have not bought a boat or a motorcycle, so she will keep me for a while longer
Film Friday – Double Feature: Attic and Bath Remodel Status
I spent two FULL days, with a little help from my wife, instaling the baseboard, door, skylight, stair, and window trim in the new attic space. This video includes a few tips and tricks along the way. As this will be my wife’s studio space, she put in some sweat equity filling nail holes, doing a little sanding, and she chose the paint scheme. I will be painting next and will document that whole process as well.
This is Part 1 of our basement bathroom build/finish. We decided to add a basement bathroom when we replumbed the house a couple of years ago. 6 months of chaos insued and we took a two year break before diving back into the bathroom build. This time has been SO much better. We went with white subway tile for the walls, black and while hex tiles for the floor, and charcoal grout. The next step is trim, paint and fixture install.
Film Friday – Attic Remodel: Week 7
This is the last of the weekly updates for the Attic Remodel Project. The heavy work and drywall is complete and I will start trimming and painting the space this week (nights and weekends as I have a real J-O-B) so that my wife will have a studio that is full of light and opportunity. The next and final installment of the attic build will show all the paint and trim steps, some tips & tricks, and will be a few weeks away.
Jeep Re-Build Update Video
I got the Jeep back from paint months ago and it has been sitting on the lift in the garage – letting the paint cure as we have had work done at the house (Attic and Basement). I am not 100% happy with the paint, but that is another video. I have been collecting small cardboard boxes full of goodies since last October for the after-paint re-fit. That installation process has begun with the mounting of lights, fender flares, a new bumper, etc… I am giddy with anticipation to get it out in the Seattle summer sun.
Attic Remodel: Week 6
This week, we went from bare studs to insulation to wiring to drywall with a dash of new windows thrown in for good measure. The HVAC split unit head vacuum & power lines were installed and we had a serious accident in the attic that occurred during that process.
Film Friday – Week 2 of the Attic Rebuild
I know… I have been posting a bunch of videos lately and not a lot of travel, Jeep, Puppy, garden, music, building, or other normal posts. That will change with the coming of Spring and the completion of our attic remodel/rebuild. In that vain, below is the short video documenting week 2 of the process. It looks like it will be a 5-part series.
Mid-week Update
So, this week has been crazy at work and at home. On the home-front, there were birthdays, shopping, it is Income Tax time, we have 3-4 guys showing up every morning at 7:00 with tools in hand to work in and on the attic.
My shop is full. I can’t even get to my table saw and my bench is stacked 5′ high with insulation. I need a little shop time to keep me sane or at least saner… So, I took a little me time and signed up for some classes for spring and early summer where I will get use other folks shops and build/make stuff:
- Canoe Paddle Making
- Claw and Ball Foot Carving
- A 10-Week Letter Press Workshop
- Woodcarving Figures
- Spoon Carving
- Block Printing
- Industrial Sewing: canvas and leather
The Jeep Rebuild After Paint
As you know, I got the Jeep back from paint about a month ago and it has been sitting on the lift in the garage – letting the paint cure. I am not 100% happy with the paint… It took 4 tries for them to get the hood and fenders right and there are little spots and dings on the tailgate. There is also some mess just above the nerf bars and a run on the rear fender that makes me twitch, but they will be covered by some trim and the fender flairs, so… I included the Jeep’s homecoming in a video here, but skip to 5:09 as I spent way too much time blabbing about other non-Jeep related crap in the 1st part of the Video.
Anyway, I have been collecting small cardboard boxes full of goodies since last October for the after-paint re-fit. That installation process begins this coming weekend. I am giddy with anticipation.
The part additions and changes from Morris, Amazon, ARB, and Northridge4X4 include:
Duel Battery tray
Halogen headlight Lamp Conversion Kit (wanted LEDs, but don’t want to pay $600+ for headlight!!)
Black Rugged Ridge Fender Flare Kit
Stainless Fender Flair Hardware
Front Side Amber Marker Lights
New Wiper Blades
New thick rubber floor mats
BestTop Bikini Top (uses existing soft top channel) for the 2 months of sun in Seattle this summer
Rugged Ridge LED Tail Lights
Front Parking Lamp/Lens
Black Factor 55 FlatLink Winch Cable Shackle
Burnt Orange Jeep Fender Decals
New Frame to Cowl Weather Seal
Black Powder Coated Stainless Steel Side Mirrors
New Winch Cover
Warn Winch bumper with D-Rings
Black Vinyl Spare Tire Cover
New Aviation-Style Light Switches for front spots and reverse lights
Stainless Steel License Plate Holder (I had it powder coated black)
Second set of D-rings (Powder Coated Burnt Orange to match Jeep Logo)
Hi-Lift Jack Rebuild Kit (sandblasting and repainting origional)
Bronze Door Hinge Bushings (sourced at McMaster-Carr)
Warrior Pipe ½ doors (because I can)
ARB Recovery Tools Bag to organize my off-road gear
ARB Compact Onboard Air Compressor (Got a SMOKING Deal at the ARB booth at a recent Jeep Swap Meet!!)
Getting new bar covers made as well
Film Friday – Framing Double Feature
We are remodeling and rebuilding a 90+ year old attic into a master bedroom. This required completely rewiring to electrical in the attic, moving/fixing plumbing, building a complete floating floor, adding roof supports, etc… Below is thew documentation of the 1st week of the build.
Part I of a 2 part video on the replacement of a falling down 90+ year old shack of a carriage shed with a modern 24X24 garage. This was not a flat mono-slab, green field build. Lots of digging was required and a rebar-filled retaining wall and slab had to be poured in the middle of winter before the first wall could go up.
President’s Day 2018
President’s Day is here and it is time to prune the fruit trees, roses, and lavender. Or at least that was my plan for yesterday. Instead, I spent WAY TOO MUCH time on Twitter – ranting about sensible gun laws and the current US administration. I also spent a couple of hours cleaning the house, washing dishes, working on 2 videos, walking the puppies, and working in the shop. So the entire day was not wasted on-line.
In the shop, I am building a Screen Printers Workbench for a local artist, Amy M. Douglas. She does some pretty amazing prints and oil/acrylic work. We are trading my time for art, so it is a win/win for both of us. Below are a couple of shots taken during the build and I will have a whole YouTube video about the build in a week or so.
I will spend an afternoon this coming weekend pruning, re-stacking firewood, and cleaning the yard – I see a dump run in my future.
3/4/2018 Update:
The bench is done and delivered.
2018 News Year’s Resolutions:
A year ago, to the day, I said that I would do a bunch of stuff in 2017. I did OK, but not great. I could blame it on my old man hip, the surgery, or the recovery time, but mostly not getting stuff on the list done was all me. All my own laziness, stuborness, or my A+ skill level of procrastination. These are the promises I made to myself that I kept:
Take a pottery class
Take a Blacksmithing class at the Pratt
Read 1 book every 2 weeks – minimum
Play my uke, banjo, and guitar with others
Give lots of $$ to Heifer and MFS
Make movies and post: Adventure, craftsmanship, and family.
Make Stuff!!
Ride my skateboard because I am not too old or too fat
Road trip in WA more
Take my wife on vacation
Plant a spring garden
Fix up the front and back yards
The following is what I am committing myself to do in 2018:
- Organize my chaos in the shop and basement.
- Sell, donate, recycle, or throw away shit that I do not use.
- Use my planner and notebooks as tools not as something that I “have” to use.
- Eat my veggies. Seriously. Salads in my future.
- Take my desk at home back and make it a conducive writing space.
- Cut WAY back on sugar and carb intake!
- Lose weight – back to 175! and put on 5-7lbs of muscle
- Go to the gym 3-4 time a week – minimum.
- Box more at the gym and at home
- Write more: Blog posts, REAL letters, Thank you notes, fiction, and non-fiction
- Take more great pictures
Fly my drones more- Take at least a 45 minute lunch at least 4 days a week at work
- Show up to yoga at least once a week
- Take another pottery class
- Finish my CJ-7 Jeep restoration
- Look into getting back into the judo dojo
- Sign up and compete in the Gambler 500 car race
Sign up for a letterpress class at SVC Downtown- Take another blacksmithing class at The Pratt
- Read 1 book every 2 weeks!
- Learn how to play the mandolin and banjo better!
- Play my uke, banjo, and guitar with others
- Build a skin-on-frame canoe for two
- Road and mountain bike
- Take the puppies to Lincoln Park for a walk at least once a week
- Ride the living shit out of my Single -Speed
- Bike to work at least 5 times this year (12 miles each way)
- Volunteer more at the Center for Wooden Boats
- Pay off all credit cards
- Go sailing in Puget Sound
- Turn some amazing and useful stuff on my lathe
- Give lots of $$ to Heifer and MFS
- Make at least 1 movie a week for YouTube and post: Adventure and craftsmanship
- Monetize my YouTube account and increase my presence and standing in that community
- Lessen my Twitter and social media activity…
- See my kids and grandchildren more
- Be involved in politics more: financally and with a time commitment
- Work on my Genealogy database and organize all my info.
- Finish the house remodel – even if I have to pay a contractor to do it (…shudder…)
- Finish the garage/shop/GROP build
- Make.More.Stuff!!
- Ride my snowboard and skateboard because I am not too old or too fat
- Road trip in WA and on West Coast more
- Have two hives of healthy, happy bees
- Kayak lots!
- See my friends more
- Take my wife on vacation
- Plant a spring garden and have a really bountiful fall harvest
- Have an awesome Griswald-like Christmas light display!
I am printing this list out and pasting copies in my notebook, work planner, in the shop, at my desk at work, on the fridge, and in the basement above my warranty voiding workbench.
Film Friday – Oak and Maple Pizza Peel Build
My Father-in-Law, The Chatty Buddha, wanted me to make him a pizza peel and while I have built cutting boards and boat paddles, I hadn’t yet made a peel. I agreed, sourced the lumber from a local salvege store. It used to be flooring, but after some magic with the table saw, jointer, some glue, and a hand plane or three – he has a pizza peel that I gave to him for Christmas. I hope to be enjoying pizza from it for years to come.
Film Friday – Offering Candle Stand Build
As the weather has cooled down, there are some welding and fabrication projects that I need/want to take care of during the short, cold, dark days of winter. This short video details the fabrication of a steel votive candle or offering candle stand that I am built for my wife/our house. It is made to fit on top of the Prie-dieu that we brought back from France. The stand is made from 1/8″ steel channel and plate, though looking back at the video the plate might have been more like 5/16″ ish…
My Own Personal Take on Hand-planes: Buying Recommendations to Use
I use the bejesus out of my power tools. I LOVE my SawStop, my Bosch compound miter-saw is scary accurate, and my band-saw is magic, but there is room in my life and in my shop for lots of hand-tools. I am a child of both Norm Abram and Roy Underhill. I watched them both on PBS every Saturday after cartoons as a small child in 1981 until I was 44 or so. Their combined influence has made me value the old way of doing things without being a Luddite and I can appreciate modern cabinet shop/woodworking tools. Case in point: I have a 3HP Powermatic 3520 lathe and would not even want to think about turning a bowl or platter on a pole lathe with a forged hook knife. On the other hand, while I have not given up a single one of by 5 routers, I found years ago that it is sometimes faster to grab an old wooden molding plane from a shelf and take care of an edge detail or piece of trim. I can be done and dusted with the plane in the time it would take me to find the right bit an set up the router.
Because of my vocal love for hand planes, I get questions all the time from friends and acquaintances about what they should buy, where they should start, how to set something up, sharpening, truing a sole, etc… I thought I would take a minute to go over those things, stand on my soapbox a little, and give the world my opinions concerning hand planes.
.. Ascending my soapbox… Ahem…
- Buy a quality block and #4 smoothing plane – Lie-Nelson, Wood River, or Veritas are great options. Stay away from used hand planes or classics until you get used to how a hand plane SHOULD work. Setting up an older Stanley or Bailey plane, sharpening, replacing parts and flattening the sole will drive you insane if you don’t know exactly what you are doing and will make you want to throw the thing and swear off hand planes forever. Start with the known good and once you know how it should function, then you can pick up a used #2 bench rabbit or a #8 corrugated bottom jointer and tune them sweetly – maybe. I would go over any prospective purchase with a scornful eye and replacement the blade and/or chip breaker on an old plane is required about 50% of the time, in my experience anyway.
Here is my list of the initial planes and accessories you will want/need ( I like the low angle but to each his own):
- Stanley Low-Angle Block Plane
- Shoulder plane
- Smoother plane
- Plane chip-breaker Screwdriver I swear to God you need this, really! When you mare the screw an a $200 plane because you didn’t listen, it is your own fault for not listening.
- Sharpener: get two…
- Buy a nice set of Japanese water stones 1000 to 8000 grit. Watch the videos and keep your blades sharp.
- Also, Japanese planes, like Japanese pull saws and water stones, are FANTASTIC. They deserve their own diatribe, but for the purpose of this post I will stick to western planes with the exception of an edge-rounding plane. I use mine constantly.
Nice to have once you get serious about using hand planes:
- Jack Plane
- Jointer planeSpoke shave Get the flat first then the curved. You probably wont ever need the concave one.
- This Router plane but, if I were in the market for a new one, this Walke Moore version is the nicest I have ever seen!
- Scraper plane – get the toothed blade
- A combination plane, but be wary of used Stanley Record #45/#46s. They can be a beast to swap around and if they come with all the original parts they are spendy!
- if you are going to be doing a lot of drawers or insets, then both a Left and Right Plow Plane are really nice to have
- Wooden molding planes : See below…
Once you have been bitten by the molding plane bug, you will want to run right out and buy a 1/2 or full set. Good luck. There are not a lot of makers out there and the ones that are doing it have a long wait list and are not cheap. Some people, like myself, invest is an older set. My molding planes include a 3/4 harlequin cove and round set (mixed from various makers and time periods) that I have carefully built over the last 9-10 years. The dates for my planes run from 1956 to 1930s to 1850s/70s and I have one from the 1790s that has an uncommon roman ogee shape that I use on boxes and 6-board chest lids. This collecting takes time as there has never been a set standard for what a #8 is, for instance, so there is a lot of variance in sizes between makers. I have replaced a few irons as well.
I often defer to people that are smarter than me and Matthew Bickford and Chris Schwartz recommend a set of #4 and #8 and a set of #6 and #10 hollows and rounds as an initial starter set. I would add that a 3/16 beading plane is a wonder to have as well if and when you start down this road.
To my own set, I have added some additional beading planes – up to 1/2″, tongue & groove planes for 1/4″ – 1″ stock, specialized profile molders, 1/4 rounds, scrapers, etc., but those is my own personal obsessive tendencies.
I failed miserably at finding a classic matched set of snipe-bills and half rounds (NEEDED for linen-fold panels). I have resigned myself to buy new ones from Old Street Tools, but I have to warm my wife to the idea of me spending serious cash on blocks of wood and iron that I will use 5-6 times a year. I have been working on her for 3 years and they are on my Christmas and birthday list every year. No luck yet.
Read Bickford’s Moldings in Practice (if you have bled with me or we have swapped spit, you can borrow my copy) and take a look at the video of the same name before jumping in. Molding planes can be sourced from the following, in no special order:
New planes:
- Caleb James
- Matt Bickford
- Old Street Tools
- Made in England Philly Tools
- J. Wilding Planemaker
Classic:
- Jim Bode Tools for reliable planes
- Liberty Tool has great molding and fine steel planes as well
- I have made some decent finds on Inchmartine Tool Bazaar
…and now I will dismount my soapbox…
Film Friday – Another Hammer Re-Work/Repair
I had a tired, old, home-made, second-hand chipping hammer that was broken and had been so for years. So, I MIG-welded the busted joint, ground the transition, and added a reclaimed hickory handle, which came from a hatchet rebuild shown in a previous video that I posted on YouTube. With the re-weld and addition of copper handle rivets, it should last a few decades now.
Weekend in the shop
I got some serious crap done in the garage and at home this weekend:
Cleaned, swept, and put away tools for over an hour Saturday morning
Added wheels to my screw-clamp stand
Built a hammer stand – I have a lot of hammers
Organized 4 drawers on my tool cabinet
Organized a drawer for just camera mounts and cables
Hung 22 small blue U-Line organization bins
Cleaned off table saw
Installed new table saw blade
Re-tensioned bandsaw
Cleaned off bench for 1st time in MONTHS!
Put all the miscellaneous screws, bolts, and hardware in the proper organization bin
Sanded the carcass for a bathroom cabinet installation
Moved some angle-iron into the metal storage rack
Carried 2 of the 3 cabinet sections in the house
Cranked on the lathe to reduce the diameter of a dowel
Blew 30 amp breaker
Said the f-word at least 3 times
Took a look and original electrician did not fully terminate one of the “hot” wire legs, which led to the failure.
Said dirty words
Drove to Home Depot and back for breaker
Swapped out a blown breaker
Ran 75 linier feet of 12-2 Romex wiring
Installed 12 electrical boxes
Only dropped 1 on my head/face
Installed a couple of runs of CAT-6 ethernet cable for the PoE camera system
Jesus, CAT-6 is expensive!!
Moved some firewood into the house
Built and installed butcher paper roll noteboard on a cabinet front
Re-set wall clock
Worked on chipping hammer re-build
Shot a couple of videos
Sanded a couple spots on the jeep under windshield
Wished I had a bathroom in the garage at 3 different points during the weekend
Started on pizza peel build for Father-in-law
Film Friday – Blacksmithing and Forging
I am a novice smith and that is being generous. I do like to forge though and it is awesome when I get a little time to make things for myself. This short film details a couple of the different type of hold fasts (metal work and word work) that I recently made at the Pratt Center for Fine Arts forge in Seattle. If you live in Seattle, have a single maker bone in your body, and haven’t checked them out – do so immediately and sign up for a class or two.
Film Friday – The Garage Sidewalk Pour
Below is a short film documenting all the steps taken in pouring a walkway between our existing patio and my garage/shop, as also discussed in less detail in a previous post. I MAY have overbuilt it… a little… maybe…
Garage sidewalk now poured with a side of cat-related drama
The sidewalk to the garage is finally poured – 8 weeks after I put the forms in… To recap, it is 20’X4′ and 4″ deep. I used 3500PSI with fiber added and lots of steel, because I hate cracking sidewalks. I paid a guy working on the house next door give me a hand with the wheel barrow concrete moving and to move-hold the other side of the scree board. It took two hours from the minute the truck rolled up until I was cleaning up my tools and I saved >$1500 doing it myself, even with the cost of material, delivery and a couple of new tools.
I was super happy with the results when I went inside at 5:30. When I went back out to check on it at 9:30, the cat had walked up one side all the way to the garage, walked across, and back down the other side. I now have cat prints in my “perfect” sidewalk until the end of days…
I am not anthropomorphizing, she did it as a “Fuck You bald monkey!” because I would not let her in the house. It was too dry to re-float. This morning, to add insult, the hate-cat dropped a giant turd in the middle of the thing up by the garage door. I said such dirty words! This is the last straw!
Who would like an overweight white fluffy cat that is passive aggressive and shits on the things I love? I will throw in 2 bags of food, a carrier, shot records, box of band-aids, half eaten mouse, and 3 cat-nip impregnated toys. It is an awesome deal! Won’t last! Act now before someone else snatches her up!
Forging and Fabricating
I can do and make bunches of stuff: Everything from joinery to electronics, from wood turning to machining, from bookbinding to electrical, from carving to heavy machine operation, but there are certain things that I have never really been able to do in the world of hand-craft, mostly due to lack of exposure or instruction. Chiefly among these things are/were forging/blacksmithing and metal shaping. The latter composed of shaping and bending sheet metal into forms and objects.
I decided this year to work on those deficits and have been taking some forging and fabrication classes at The Pratt Fine Arts Center in Seattle. A couple nights a week, I leave work and hammer, shape, weld, grind, and make stuff out of steel. I have been at it for 5 weeks and am really please with both The Pratt and all that I am learning. I have also learned that while I have dipped my toe in these waters, that there is a ocean of knowledge out there. I do not have any want to be a full-time blacksmith or fabricator, but I want to keep learning, so I can add some of the techniques and pieces to stuff that I already build and add to my repertoire of ability and understanding. Below are some of the pieces that I have made, tools I am using, and some stuff that I am working on. I am putting together a little video as well.
Film Friday – 41st Annual Port Townsend Wooden Boat Fest 2017
Below is a short film documenting my visit to this year’s Port Townsend Wooden Boat Festival. I lived up to my promise to Stamps-With-Foot again this year and did not buy a wooden sailboat, but there was 2-3 in my price range (and about 100 waaayyy out of it…) that made me drool.
Film Friday – Corner Cabinet Up-Cycle/Rebuild
Way back in November of 2015, just after our return from living abroad for two years, I bought a set of hard used, little loved corner cabinets from a local salvage place. I have spent an hour and there installing, building trim, sanding, de-gunking, stripping old paint, priming, painting, and more painting. It has only taken 18 months, but they are now installed and look like they have been in our living room since the very first day.
Here is a slideshow/video tale of the steps taken in the project: What it was to what it became.
Visit to a Kayak Museum in Portland
I read about a supposedly gem of a kayak museum in Portland maybe 18 months ago. Hmmm… Skin on frame kayaks… A museum… Huge collection… Quirky hours… Hmmm….
After a little inter-web research, I found that the Lincoln Street Kayak and Canoe Museum is the work of one man, Harvey Golden, and the collection is made up mostly of boats that he has hand built after surveying traditional native boats all over the world. I was in!
Mr. Golden uses the museum as a repository for his boat collection and as the home of his publishing house, White House Grocery Press. The museum is open to the public here and there as he is in the office and has set hours from 5-7 on Wednesdays. Knowing all that, I was almost vibrating to get a peek at his boats and paddles. I had stopped by the museum a couple of times when visiting Portland, but the timing was always off and I was never in town during the posted open time Wednesday afternoons. I was going going to be in The Rose City for a long holiday weekend and sent Mr. Golden an e-mail asking if he might, by chance, be around when I was in the city and to my great surprise, he got right back to me and agreed to let me stop by one Tuesday morning – I brought him a coffee when I showed up at the planned 10:00 on the dot.
His collection of boats, paddles, gear, accessories, and models is amazing – as are his books on the subject of kayaks. Here is the kicker though and why I am spending some time discussing a specific museum visit: he was amazingly generous with his time and spent over an hour and a half with me to explain the collection, bits & bobs, details, accessories, etc… I really, really appreciated it. His generosity of time is not something I see a lot of these days.
If you are into kayaks or boats in general, stop by the free museum and take a look at his books as well. I am about 70 pages into the super-detailed and annotated Kayaks of Alaska and want to build them ALL…
Film Friday – Recycling Sawdust and Wood Chips
I spent last weekend in Portland, Oregon and happened by a custom furniture shop downtown called The Joinery. The workmanship of their wares was terrific and the sales staff was really accommodating. They knew I wasn’t going to buy any of their very nice pieces and yet still explained their ethos and process, details of the builds, and even let me wonder around taking a couple of pictures. If Mid-Century to Japanese Fusion to 21st Century Modern is your thing and you are as allergic to IKEA pressed wood crap furniture as I am, them look them up and see if they have a piece of furniture that you have to have to fill that void in your living-room/soul.
Aside from their furniture, they had a display of pressed hardwood sawdust pucks – making furniture produces some waste and normally this sawdust goes to landfills or in my case, used for mulch and compost roughage. Their display piqued my interest and I started asking questions. The Joinery and like establishments produce exponentially more sawdust than my little shop does, so their way of dealing with it is that they have invested in a sawdust briquette press that makes these hardwood hockey-puck-ish sized briquettes that are burned in pellet stoves, regular wood stoves, or fireplace inserts to provide heat. There is no glue or bonding agent used, just pressure from a hydraulic ram-press keeps the pucks together. The shop goes a little beyond expectation though and GIVES THEM AWAY FOR FREE to the public at their other sales location and workshop (48th and Woodstock in Portland). I can’t even tell you how happy it makes me to see a company do this. The shear fact that this is part of their business model makes me want to buy a small occasional table or some such item just to support what they are doing.
I am so turned on by this that I am looking into a small briquette press for my shop. The ROI time for the model that meets the size/cost requiremnet for me (a UK made press, a couple of Chinese machines, and one Canadian model) would be like 2 years for my limited use, but it would be worth it to me as there is only so much mulch that I and my neighbors can use. I would like to use the briquettes for some house heat and to heat the shop and green house in the winter, giving away what I didn’t use. Stay tuned for updates in my hunt and go by The Joinery’s website of shop and support them if you can.
Film Friday – The Garage Build Film Part 2
Below is Part 2 of a 3-Part series documenting our garage/shop build. Like Part 1, this film is made from pictures taken during the build with a voice over commentary. Part-3 will be a mix of videos, stills, and some drone shots.
There is a “hidden track” at the end…
Film Friday – The Garage Build Film Part 1
I’ve had a number of people on various web forums, 6 sets of neighbors, a few friends, and a ton of folks in our area ask me some detailed questions about our garage build: size, foundation, demo, siding, wiring, roof, the car lift, etc… As I have been making some videos while rehabbing the hip, I thought that I would turn my garage build into a three part YouTube series to answer most of the questions and have all of the information documented in one spot. The first one is done and up now and the second should be done in a few weeks.
This one and the next are from pictures taken during the build, with a voice over. The third will be a mix of videos, stills and some drone shots. I learn something every single time I put a video or slide show together, so my hope is they get more and more watchable.
I didn’t have the time or facilities to do it in this video, but I would like to use my own guitar, banjo, ukulele, fiddle, and mandolin picking for the soundtrack on future videos. My son, brother-in-law, and any friends I can con into it will also be future soundtrack contributors.
Film Friday – Baidarka (Skin on frame Aleut kayak) build movie
With the hip related bed rest, I have had some time to catch up on some film-making and finally finished this little slideshow film documenting the entire process of a 9-day father/son traditional kayak build that I blogged about this past summer. The next build will be either a small motorboat or a wood-strip cedar canoe.
Let me know if you have any questions about the video.
Boat Lust
So, you may or may not know this about me, but even though I currently own a couple of small boats, I have MAD Boat Lust. I am a member of the Center for Wooden Boats, I get Wooden Boat Magazine & Small Craft Adviser Magazine every month, go to the Lake Union, Seattle, Portland, and Port Townsend boat shows every year… I follow four sets of Blue Water sailors on YouTube, am trying to con my wife into taking a sailing vacation (I am getting a hard NO! on that one currently), and almost bought a used 22′ lead keel sailboat last summer for “my son.” I tried to sell it as his “learner Boat” and play up the father/son bonding time angle with it and my wife saw right through it. To date, however, I have not come home to tell my with that “We” just purchased an Amel 55 blue water sailboat, a 47′ diesel powered Cabin Cruiser, a Chris-Craft in need of some “light repair”, or a Hans Christian 33 kept in Bristol Fashion that “I” am planning to live on since said purchase would leave me homeless, devoid of my puppies, and divorced.
If my son, The Ruminator, lived in Seattle I wouldn’t mind a swing keel Columbia 22 or a Catalina 22 to gunk hole around the Sound in with him. A Catalina 270 LE would make my heart go pitter-patter as well, but I am a realist (-ish) and very aware of my current budget and available storage space. A sailboat that I would only use a few times a year and have to pay moorage on, would make me very unpopular at home. But, if someone has a 19′ WW Potter taking up space in their life that needs a new home, I would be game…
While what I WANT is a sweet little sailboat, what I NEED is a small outboard that that sits on a trailer in or beside the garage, that I can pop over to Blake or Vashion Island on, run up the Duwamish River a little piece, do a little salmon fishing on with my son or friends, haul a crab pot or three in season, find a secluded weekend beach for summer camping, etc… It needs to have a cuddy cabin to get out of the shifty weather here in Puget Sound, some storage space to keep gear dry, needs to be light enough to be pulled behind the jeep when fully loaded, and fast enough to handle the tidal flow in the PNW.
Buying a finished boat, even used, like a Ranger Tug 21, a C-Dory 19, or a Boston Whaler 21′ Cuddy are WAY out of my price range, I have been perusing Craigslist for a 16′ -21′ hardtops, but the ones I have found are either gold plated & upholstered in unicorn foreskin or needs to be sunk. So, in due course, I have been thinking about building the boat of need mentioned above. I know, I know… I have a shit ton of projects already with the shop and house, but I won’t start the boat until Stamps-With-Foot agrees that the house is good and all the little projects at home are squared away. Happy wife, happy life.
To digress a bit, my current home-built boat want is a Devlin Boats Dunlin 22 Cruiser with all the bells and whistles, but that too would be spendy, require me to quit my J-O-B to obsess over the details properly, I would have to rent out boathouse space for the duration of the build, have the time to build it, and would probably cause my sweet bride to up my life insurance just before “accidentally” pushing me into a wood chipper.
Back in reality, I am looking hard at building a couple of boats, including a Devlin Noddy 18. It is something realistic to build over the fall and winter, in the space I have available in the F-Bomb Garage, and within my current budget. Powered by a 4 stroke 50HP Honda or Yamaha, with homey little extras like: a sardine wood stove in the cabin, a crab pot winch arm on the stern, and lots of LED lights. 
Devlin Boat Works in just south of us in Olympia and in addition to being a design house, they are a boat works and build all manner of craft there at any given time. I sent a couple of e-mails and made some calls about the possibility of going down this summer if they have a Noddy or similar hull under construction. We will see if it can be arranged.
I will have to wait just lust a little while longer to satiate my boat lust…
Update: May 2017
Nope. Devlin is off the list. I can’t find anyone on the boat forums that has built the Noddy AND I have not had a single phone call or e-mail replied to. I don’t need to do business with someone who I have to beg to take my money.