Getting Stuff Done Over the Weekend

June 5, 2017 / Matt Talley / Leave a comment

We had a really productive weekend around the house – so much so that I to take an old guy nap on Sunday. In no particular order:

Organized and cleaned up shop from Garage sale two weekends ago
Took 10 boxes of good stuff to Goodwill
Bought and brought home cabinets and wine racks from Habitat for Humanity in Tukwila
Sourced and purchased some additional boxwood shrubs and mulch for the yard
Mowed the new sod in the yard for the first time
Took the puppies for a walk
Date Night: Burgers and a late 3D showing of Wonder Woman.
Cleaned house
Spent 1.5 hours looking for either one of my orbital sanders
Said dirty words the whole time
Sanded Corner cabinet doors
Shocked the hot-tub with chemicals getting ready for water and filter change
ad a couple of nice glasses of French rosé in the sunshine.
Made lid from up-cycled ceder fence boards and used hardware for the compost bins
Hung two paintings
Organized dining room
mounted 6 stringed instruments in the hallway
Installed new toilet seat
Ran the chainsaw a bit
Made some woodchips and used as garden bed mulch
Picked up 4 huge rounds of cedar from a neighbor who has a tree cut down to split for kindling
Took out trash and recycling – there was a LOT of the latter
Met new neighbor
Another walk with the puppies
Made a trip to CostCo and dropped more $$ that we wanted to
Paid $12 for a used plywood miter saw station – SCORE!
Drank lots of coffee
Murdered some dandelions in the yard
Paid some bills
Wrote a couple “Thank You” notes
Read a little
Didn’t sleep enough

Making the yard pretty for 2017

May 26, 2017 / Matt Talley / 1 Comment

Our back yard has been a mess for over a year: Stacked with left over construction debris, seriously over-grown raised garden beds, unturned compost bins, blackberries along both fences, piles of landscaping stones, weeds, etc.… The front yard was presentable, but only just barely. 2016 was the year of house and garage construction and 2017 was meant to be the year that we focused on the yard. Surgery delayed that a bit and the state of the grounds at La Maison du Talley was getting embarrassing.

I had a couple of guys come out and take a look at our mess to see what it would cost to get it back in home-show worthy shape. I didn’t like either answer. Without going into too much detail about the different bids, the low one was $3500 and the high was almost $5000. There was no way in Hell that the frugal DNA coursing through my veins, passed down from both the Talley and Webster lines, would biologically allow me to spend that kind of money on grass, mulch, and a few flowers.

After I was well on the mend and cleared by my physical therapist, I did some planning, logistic estimation, material cost math, and decided to do it myself with a bit of casual day labor. I also decided that the mature ornamental cherry trees I wanted for the parking strip would have to wait, that I didn’t need to bring in topsoil and plant grass seed. I scaled back the dream a little bit, bought 86 rolls of sod, 19 bags of mulch, 8 bags of garden soil, some boxwood shrubs, 15 Spanish lavender plants, and let my sweet wife buy all the pretty flowers that her heart desired.

In two days, the front and back yards were transformed! I hauled away 1600 pounds of yard waste, made one dump run for trash, one run full of recyclables, and we spent less than $1000. We will spend the next few weeks watering and fussing over little details, but by July 4th, we should have Ireland-green grass, pretty flowers, healthy fruit trees and the BBQ grill roaring. Money and time well spent.

New Summer Vacation Plans

May 15, 2017 / Matt Talley / 1 Comment

My summer plans have been changed for me. I had planned out another summer vacation spent with The Ruminator, but he is 16 now and has decided that he wants to stay home in Arkansas and be a lifeguard for the summer. I get it, I am his boring dad and it is hard for me to compete with ladies in swimsuits for the summer. I had pigeon-holed some time off and funds for sailing lessons/trip, diver certification for him, some diving, and ending the summer with a rock climbing road trip all the way down the west coast. While all that sounds cool to me, I am not a handsome young man facing all the unsaid possibilities of tanned ladies in my close proximity, hanging on my every word for 2.5 months.

I now I find myself, for the first time in 14+ years, in a place where my yearly vacation time is my own and I can spend some time/money taking my wife and myself someplace where it will be just be just the two of us – cue the romantic accommodations, bubbling hot tub, chilled champagne, soft candle light, and put Barry White on the turntable. As an aside, my wife felt super sorry for me over the canceled summer plans and after a glass of wine, she has agreed that I can buy a sailboat to soothe my wounded heart. I almost fell over stone cold dead from the shock of her statement and recorded her saying it a second time for legal reasons 🙂

I flew down to San Diego last week and took a look at a 33’ sloop-rigged blue water boat for sale in the marina. It has way too many issue that need to be addressed to make any serious passages and I am not willing to spend the time covered in fiberglass bits, retrofitting a 15 year old toilet, huffing hull paint, and wading in stagnate bilge water. While a steal of a deal for what the boat is/could be, I will keep looking.

Right now though, I am thinking of starting the summer with a little road trip to see her family in Oregon, wine tasting in the Willamette Valley, and a couple of days taking advantage of my friend Dr. G’s house and hospitality in Northern California. There will be a long weekend in the Bay Area and Napa with friends and family. We are also going to make a good part of the local Washington/Oregon festival circuit this summer.

Film Friday – The Garage Build Film Part 2

May 12, 2017 / Matt Talley / Leave a comment

Below is Part 2 of a 3-Part series documenting our garage/shop build. Like Part 1, this film is made from pictures taken during the build with a voice over commentary. Part-3 will be a mix of videos, stills, and some drone shots.

There is a “hidden track” at the end…

Film Friday – The Garage Build Film Part 1

May 5, 2017 / Matt Talley / Leave a comment

I’ve had a number of people on various web forums, 6 sets of neighbors, a few friends, and a ton of folks in our area ask me some detailed questions about our garage build: size, foundation, demo, siding, wiring, roof, the car lift, etc… As I have been making some videos while rehabbing the hip, I thought that I would turn my garage build into a three part YouTube series to answer most of the questions and have all of the information documented in one spot. The first one is done and up now and the second should be done in a few weeks.

This one and the next are from pictures taken during the build, with a voice over. The third will be a mix of videos, stills and some drone shots. I learn something every single time I put a video or slide show together, so my hope is they get more and more watchable.

I didn’t have the time or facilities to do it in this video, but I would like to use my own guitar, banjo, ukulele, fiddle, and mandolin picking for the soundtrack on future videos. My son, brother-in-law, and any friends I can con into it will also be future soundtrack contributors.

Film Friday – Baidarka (Skin on frame Aleut kayak) build movie

March 31, 2017 / Matt Talley / Leave a comment

With the hip related bed rest, I have had some time to catch up on some film-making and finally finished this little slideshow film documenting the entire process of a 9-day father/son traditional kayak build that I blogged about this past summer. The next build will be either a small motorboat or a wood-strip cedar canoe.

Let me know if you have any questions about the video.

Boat Lust

March 19, 2017 / Matt Talley / Leave a comment

So, you may or may not know this about me, but even though I currently own a couple of small boats, I have MAD Boat Lust. I am a member of the Center for Wooden Boats, I get Wooden Boat Magazine & Small Craft Adviser Magazine every month, go to the Lake Union, Seattle, Portland, and Port Townsend boat shows every year… I follow four sets of Blue Water sailors on YouTube, am trying to con my wife into taking a sailing vacation (I am getting a hard NO! on that one currently), and almost bought a used 22′ lead keel sailboat last summer for “my son.” I tried to sell it as his “learner Boat” and play up the father/son bonding time angle with it and my wife saw right through it. To date, however, I have not come home to tell my with that “We” just purchased an Amel 55 blue water sailboat, a 47′ diesel powered Cabin Cruiser, a Chris-Craft in need of some “light repair”, or a Hans Christian 33 kept in Bristol Fashion that “I” am planning to live on since said purchase would leave me homeless, devoid of my puppies, and divorced.

If my son, The Ruminator, lived in Seattle I wouldn’t mind a swing keel Columbia 22 or a Catalina 22 to gunk hole around the Sound in with him. A Catalina 270 LE would make my heart go pitter-patter as well, but I am a realist (-ish) and very aware of my current budget and available storage space. A sailboat that I would only use a few times a year and have to pay moorage on, would make me very unpopular at home. But, if someone has a 19′ WW Potter taking up space in their life that needs a new home, I would be game…

While what I WANT is a sweet little sailboat, what I NEED is a small outboard that that sits on a trailer in or beside the garage, that I can pop over to Blake or Vashion Island on, run up the Duwamish River a little piece, do a little salmon fishing on with my son or friends, haul a crab pot or three in season, find a secluded weekend beach for summer camping, etc… It needs to have a cuddy cabin to get out of the shifty weather here in Puget Sound, some storage space to keep gear dry, needs to be light enough to be pulled behind the jeep when fully loaded, and fast enough to handle the tidal flow in the PNW.

Buying a finished boat, even used, like a Ranger Tug 21, a C-Dory 19, or a Boston Whaler 21′ Cuddy are WAY out of my price range, I have been perusing Craigslist for a 16′ -21′ hardtops, but the ones I have found are either gold plated & upholstered in unicorn foreskin or needs to be sunk. So, in due course, I have been thinking about building the boat of need mentioned above. I know, I know… I have a shit ton of projects already with the shop and house, but I won’t start the boat until Stamps-With-Foot agrees that the house is good and all the little projects at home are squared away. Happy wife, happy life.

To digress a bit, my current home-built boat want is a Devlin Boats Dunlin 22 Cruiser with all the bells and whistles, but that too would be spendy, require me to quit my J-O-B to obsess over the details properly, I would have to rent out boathouse space for the duration of the build, have the time to build it, and would probably cause my sweet bride to up my life insurance just before “accidentally” pushing me into a wood chipper.

Back in reality, I am looking hard at building a couple of boats, including a Devlin Noddy 18. It is something realistic to build over the fall and winter, in the space I have available in the F-Bomb Garage, and within my current budget. Powered by a 4 stroke 50HP Honda or Yamaha, with homey little extras like: a sardine wood stove in the cabin, a crab pot winch arm on the stern, and lots of LED lights. Devlin Boat Works in just south of us in Olympia and in addition to being a design house, they are a boat works and build all manner of craft there at any given time. I sent a couple of e-mails and made some calls about the possibility of going down this summer if they have a Noddy or similar hull under construction. We will see if it can be arranged.

I will have to wait just lust a little while longer to satiate my boat lust…

Update: May 2017

Nope. Devlin is off the list. I can’t find anyone on the boat forums that has built the Noddy AND I have not had a single phone call or e-mail replied to. I don’t need to do business with someone who I have to beg to take my money.

My Wife’s Prized Chandelier Almost Made Me Poop Myself

January 30, 2017 / Matt Talley / 1 Comment

We are in the house remodel home stretch. Just small trim details left on the main floor. One of them being my wife’s chandelier installation. I had planned to install the kitchen floor this past weekend, but Stamps-With-Foot had other plans. She sat me down over coffee Saturday morning and made it clear that my plan was out and that her sparkly lamp was in. Always a fan of choosing my battles wisely – into the dining room I went.

I needed to caulk the new dining room crown molding and prep it for paint before I could install the ceiling medallion/escutcheon for the light. It took two passes and some light sanding, but all the cracks and gaps are filled and we were ready to hang the crystal and steel behemoth around 4:00pm on Saturday. I had my wife sitting in the attic holding the chandelier by its safety cable while I wired it to the ceiling junction box. Like in a really bad sit-com, there was a “ping” noise, the safety wire popped, and the stupid-expensive hunk of cut glass and metal headed to the floor. It happened like it was all in slow motion. Now this thing is not small. It is not light. It did not come with handles. From the top of a six-foot ladder, I instinctively reached way out and grabbed her prized chandelier as it fell. I teetered for a second on the top of the ladder, having flashes of crashing to earth and how many stitches I would be getting, before the ladder stopped moving and I was able to slowly walked the beast down to the floor. I did have to check my britches as it was a rough couple of seconds, anything could have happened. Thankfully, just one single tiny glass bit cracked in half from the jolt – super glue will be the answer. The ceiling medallion also popped loose and I had to pull it down, remove the adhesive and remount it, afterward clamping it to the electrical box and taping the edges to the ceiling so that the glue would set up overnight.

After getting the medallion in the air, I went to Home Depot, purchased some 1/8” stainless steel cable and with a swaging tool -everyone should have their own… 🙂 , I remade the safety cable. After waiting until the next morning, I spent an hour installing the beast. My wife danced around with giddy joy when I flipped the switch after all twenty of the 45watt bulbs were installed. Happy wife, happy life…

I will be done painting the trim this week, the blue and yellow tape will come down, and then the dining room is 100% done. On to the Kitchen.

Film Friday – Closing Out 2016 with a Snowboard Trip with My Son

January 13, 2017 / Matt Talley / 1 Comment

For Christmas break this year my son, The Ruminator, wanted to do a little Snowboarding. I figured it would be a nice positive cap to a so-so year personally, physically, politically, etc…

Note: This is the fist film edited and made since my switch from GoPro Studio to iMovie and since my conversion from a Windows 10 computer to my Mini Mac for video and Audio editing. It was so much better to use and just worked! See this post for more detail.

Not Looking for a New Job, But…

November 30, 2016 / Matt Talley / Leave a comment

Port Townsend School of Woodworking is looking for a new Executive Director. It is my dream job! I read the job notice early one morning before Thanksgiving and it checked all my boxes. I have the EXACT qualifications for this position and then some. It was like the sky parted and a ray of warm sunshine fell upon me. I needed, my soul need this job! I had a momentary lapse into my new fantasy life:

Waking up on our 43′ sailboat moored near Ft. Walton Park.
Fresh cup of coffee in the galley.
Kiss my still blissfully sleeping, blanket covered, puppy snuggling wife as I head off the boat to start my day.
Stop in by my dock-side garage shop and feed the cat (an imaginary cat as I do not have one currently, but would need one for my dockside garage shop in Port Townsend...)
Walk or cycle to work.
Spend my day smiling – the scent of fresh wood in the air around me and surrounded by people also doing what the love.
Stop by a cute local store on the way home for a couple of things and pick up flowers for my wife.
Write a few work e-mails and do a little work on some personal wood projects before dinner.
A fine meal of local veggies and fresh-caught fish with a glass or two of a 2009 Pomerol wine.
Read a little, write a letter or two, play a game of chess, and/or maybe some Netflix before going to bed in our cozy aft cabin.

As I day-dreamed about this new life, I got WAY ahead of myself thinking about how I was going to break the news that we were selling our house in Seattle to my wife. I was fully into the dream right up until I read the last little bit: “…Starting Salary: $45K to $55K”. Dammit!

I guess I will keep my day-job and just huff sawdust in my free time. I sent the notice to my boss without any explanation and I got back something to the effect of: ‘I was worried until I got to the end. I think we will be seeing you for a while longer…’

Film Friday – Racing on a School Night

November 18, 2016 / Matt Talley / 1 Comment

In the back of our brains we all thing that we are great drivers. I have been driving at various semi-legal speeds on various forms of transport for 30+ years. I have hugged corners on winding California coastal roads, slid into mud holes at 4500+ RPM with all four tires throwing rooster tails, took my GPZ900r & CBR600 on track & road courses, and had track days in an AWD blue Subaru demon, and have done a 1/4 mile in less than 12 seconds. I even have a helmet at work just in case someone wants to go to the local indoor or outdoor cart tracks. All facts and experience point to the supposition that I am probably an excellent driver. Nope, I am a realist and just an OK driver.

I have known and currently know much better drivers than myself. I have been going to a local indoor cart track to get schooled by some coworkers. We have a couple of guys on staff that are great drivers and I would like to be better than I currently am. If you want to be rich, hang out with rich people and copy what they do. If you want to be a good driver…

We Have LIGHTS!!!

October 21, 2016 / Matt Talley / Leave a comment

HOLY Bejesus… I have Electricity in the F-Bomb Garage!! Only 4 months after permit pulled and 9 months after garage build began. I have lights that are not hooked up to an extension cord, the auto door openers work, there are five 110VAC plugs ready for power tools, and my lift is now working without the aid of a 220VAC extension cord running from the drier plug in the basement of the house.

I just had the bare minimum done to get the panel and transfer switch in place and have the city sign off on the garage. Now, that is not to say that all is well in the electrical department: I am still waiting for final permit sign off for the work already done, which is on hold. Apparently, my electrician screwed up the wire routing in the meter box and SCL cannot install a meter. Thankfully they are letting me keep the lights on until my current electrician can come back and address.

I am now prepping in all the other 110 plugs myself – at 4′ high, putting in 2 additional 220 plugs and a 50amp plug for my welder. There is no way I am going to pay an hourly fee to have romex run, holes drilled, staples put in, and plugs & switches wired in. Nope. I will be paying electrician that my company contracts for industrial work to sign off on my install and run the lines into the panel and install breakers – already arranged and the price isn’t too bad at all. While I can do this in my sleep, I am not licensed and my insurance would not pay a dime is something happened, regardless of fault.

Additionally, My J-O-B was getting rid of a huge organizer bin cabinet: 1/8″ steel, 72″X24″X84″ and 350+ lbs. There was no way I was going to watch that beast go to the recycling center, so I asked if I could have it. Yep, the facilities guy said “load it up” and btw “I have a pallet jack that is wonky if you want it…” Yes, please. Got them both home and the cabinet fits perfectly and will be amazing for climbing, boarding, camping gear organization – keeping all the shop dust and debris off of my gear and making it so I don’t have to dig for small parts ever again.

The pallet jack was low on hydraulic fluid. I filled it up, put a weighted pallet on it overnight and this morning I found the pallet still in the air and no fluid on the floor. Win-win.

F-Bomb Garage Build Update: Mid-September 2016

September 17, 2016 / Matt Talley / Leave a comment

Still no electricity… long sad story from the electrician: too much work, not enough people, confusion with the city, scheduling snafu… No show at all last week. I have watched an entire house, with a garage, be built and sold 3 streets away since my garage project started…

Fall is here and the rain is coming soon, so I spent an afternoon last week with the Airless Spray Rig and painted the garage doors, bollard post, and man-door Benjamin Moore Heritage red. The door & building trim will be bright white and will go on after work one day next week. Gutters go on after.

Hand Tool Tuesday – First Post

September 6, 2016 / Matt Talley / Leave a comment

Last week, I was a little off for two days – a pissed off sort of sad. I thought I had left my hammer out while fence building and it had walked away with someone else. I found it Thursday evening in the garage and I almost did a little jig. This hammer is special to me: I bought it brand new and shinny when I was 12 because my dad said ‘Estwing was the best’ long before they were in Big Box stores and when you had to drive to a particular store in town to buy them. I think it was like $26 and I paid part of the total with rolls of dimes and nickels.

I used it to build my first wall, lay sub-floor, hang countless pictures, install everything from siding to cabinets to trim to roof trusses. It has fed me and my children. I have other hammers including a matching 16oz trim hammer and 4 blue elastomer handled Estwings, but this one has been my constant companion for 30 years and will out live me. Maybe my children or grandchildren will use and appreciate it and think of me when I am gone.

There was a book written in 1990 called “The Things They Carried” by Tim O’Brien. It is fictionalized account of one man’s experience in during the war in Vietnam told in part as a discussion about what he and his companions carried with them. I read it in college and it changed my perception and appreciation for the often mundane things we carry in our pockets, in our bags, and out tool belts. Those simple objects often come to have powerful associations and meaning for us. I have decided to start a new weekly post covering the tools and things that I share my day and life with.

House Remodel Status September 2, 2016 – 7.5 months in

September 3, 2016 / Matt Talley / Leave a comment

Here is the house/garage re-build/build status for the 1st part of September.

The F-Bomb Garage has been painted – at least the outside walls. I need to paint the trim and doors next.
Repaired some major issues with the trim and siding on garage – real unhappy with my garage builder!
Front yard is still green, but need to clean and re-seed the back yard.
There oar only 2 rooms in the house that are complete and need no work at this point. Stamps-With-Foot could be happier with me right now…
The mounting brackets for the granite in the basement are done and I will install them this weekend.
Our washing machine went out… fuck. The bearings finally gave up the ghost. need to haul it out and put another in.
No garage power yet. Huge load of confusion between the City of Seattle and my electrician. Maybe worked out now, but we will see.
The yard is completely fenced in and the rear gate is installed. just a couple of tweaks and then power wash and polyurethane coat.
The living room corner cabinets are in place, but not painted or installed.
We have a small roof leak – motherfvcker!!! it is around the kitchen vent and from where the moss removal team got too eager with the power washer. I will go up there this weekend and seal it.
Got a huge bill from our plumber for work that they didn’t do before abandoning the job. wanted to scan my ass into the 3D printer and send them a copy. Called a lawyer instead. we have a plan forward.

The F-Bomb Garage completion is getting closer!

July 19, 2016 / Matt Talley / 2 Comments

I was out of town this past week on a work trip to merry ol’ England. I came home to a sweet surprise: I have a new 10,000lb two-post lift installed in the F-Bomb Garage. I got a decent deal on a . Went with the Rotary Revolution RPT10 because there is a local dealer, local support, I got a decent deal on the lift+install, and some experience that some friends and colleagues have had with this and other lifts.

We are getting closer to finally building some stuff inside/voiding warranties/modifying the jeep. My contractor had a foreman out last week to deal with the framing punch-list items: a couple of anchor bolts, some trim, loose siding, a funky corner, and I had him re-install my three windows with the proper flashing tape – I could see light in all the corners. A leaky window after I have stressed the importance of proper installation and showed them what I needed twice would throw me into fits. He also swapped the door trim, but not everything on the list got done and now there is more stuff that needs attention. I have the contractor stopping by to go over it all tonight. Very frustrating to spend this sort of cash and to deal with all the little things over and over.

The electrician is 3 weeks out – everyone is building and remodeling in Seattle and contractors are super swamped, so I am going to concentrate on the outside in the mean time: Paint and gutters as soon as the siding issues are dealt with.

The F-Bomb Garage Lives!!

June 16, 2016 / Matt Talley / Leave a comment

My garage/shop now has a name, but first: Story Time.

I have agonized over what to call it since the early planning stages began almost 3 years ago: The Place Warranties Go to Die, The Jeep Warren, The Briar Patch, The Shiznit Garage, My Little ADHD Shed, etc…

I was out on the slab one night a few weeks ago moving around the poly-burlab curing cover, the boards holding it down, and rearranging the soaker hoses when I smacked myself in the side of the head with a wet 2X6 – really f’n hard, right behind the temple. I saw stars and staggered around holding the side of my head saying F%$#!! loudly, over & over in a machine gun staccato manner. It was all that would come out. This scene may have just lasted a few seconds or more than a minute – the timeline is a little fuzzy. My sweet wife, Stamps-With-Foot, did not see the initial head strike, just my wobbling around and apparent sudden affliction of turrets. I stumbled in the kitchen door a few minutes later and she said over her shoulder while standing at the sink: “I am sure the neighbors will be glad when your little playhouse is built so they will not have to listen to all the dropping of F-Bombs…” I was about to take gross offence to her characterization of physical culmination of my fabrication dreams as a “little playhouse” when I realized that she had provided the perfect name: The F-Bomb Garage.

I have searched the Garage Forum and the Fabrication Forums that I frequent and no one has claimed it and I have found no others, so it is mine, I call it. I found a few stickers and images that I like for a logo, but I will be making my own to apply to projects, the Jeep, the Jeep Trailer, tool boxes, etc.

2016 SKItoSEA Race Results

June 7, 2016 / Matt Talley / Leave a comment

Below is a little film from my part of the 2016 SKItoSEA relay race, which this year was 92+ miles from the summit of Mt. Baker to the shores of Bellingham Bay. Seven events: XC ski, hike/downhill ski, road-run, road-bike, canoe, XC-bike, and sea Kayak. I was my teams 3rd pick for the Road-bike leg after the first two dropped out due to scheduling issues. I rode my single speed a little in the month before to get back into fighting shape… I did a poor job. In my defense the weather was miserable: I sat and waited in 38 degrees F for 3 hours, in the pouring rain for the start of my leg. The wind and driving rain made 35 of my 42 mile leg, supper slippery and a hell of a lot scarier than I had planned/trained for. Add the 20 extra pounds I am toting around and I am shocked that I didn’t keel over.

I had figured my finish time would be around 2:15, but I came in completely out of gas and cramping at 2:32:27. Man, I hurt! I have to get super serious about training as I have a Warrior Dash in July, a road race in August, and some stupid Navy Seal Fitness Test I volunteered for in September. I am not joining the Navy, they would laugh me out of the recruiters office. This is an ego thing to see if a big group of us at work can manage to meet the minimum standards for BUDs Training.

Blah, blah, blah…. Anyway, this is a small short version documenting my lack of performance , but a whole race film is in the works.

New Garage Slab Has Been Poured!

May 26, 2016 / Matt Talley / Leave a comment

The slab is down and the curing has begun. It is not laser flat – 1/8″ – 1/4″ variance in couple spots in the field, but the pad is smooth. I had the apron poured extra thick (8-9″) brush finished and control joints troweled in. I had a sprinkler on it for the 1st 24 hours and soaker hoses and a poly/burlap wrap was applied just after the slab control joints are cut yesterday morning.

I will let is cure for another 5 days and then apply a densifyer (Ashford) on top. Framing will start next Thursday or Friday. I am so exited that I feel like a pimply teen who just scored a playmate as a prom date!

Film Friday – After work bike ride

May 13, 2016 / Matt Talley / Leave a comment

Perfect early summer afternoon in Seattle and I spent an hour on my single-speed after work, trying to shed some winter pounds and prep for a memorial day 40 mile road race. I linked up parts of the Interurban and Green River Trails.

The guy who almost tagged me around 4:22 in an engineer that works for another group. I sent him a copy of the clip and gave him a ration of good-natured sh!t for it.

Jeep Trailer

April 28, 2016 / Matt Talley / Leave a comment

I have been posting a LOT about our remodel and garage build in the last couple of months, so I thought I would mix it up and post something not remodel related – mostly not related…

Simple and unassailable fact: A grown man needs access to a truck or a trailer. Since our move back to Seattle from France, I haven’t really had either and have been visiting U-haul for my hauling/dumping/moving/logistic needs, but that is getting both tedious and expensive. I finally bit the bullet and had a trailer made to match my CJ7 Jeep. I had it built because there wasn’t one available retail that matched what all I wanted to do with it – remodel work, hauling heavy loads of dirt and lawn debris, moving, climbing base camp set up, camping, SCA events, hauling firewood, etc. I also wanted a shorter and narrower trailer than the standard 5X8 utility trailer that you can find at the roadside truck and trailer dealers. I wanted it to both look good with the Jeep and I plan on hauling it places that a bigger trailer would be a hindrance so I took the opportunity to have a little customization done to get exactly what I want.

The specs for the new trailer are as follows:

4X6 tube steel frame with extended tongue
Wheel base to match the Jeep’s so that it will track in the same ruts off-road
6 lug 225 wheels with grease zerts right on the hub
Steel load-bearing fenders
More ground clearance than the Jeep for dodging stumps and rocks on trails
Long lasting LED brake and running lights
Spare tire mount
Treated wood bed with 6 D-Ring tie downs
3500lb rated axle, so I can load this thing up with dirt or concrete
Black hardened acrylic paint to match the Jeep
Swing rear gate that is also removable
Welded lip for ramp mounts
Swinging front wheel jack
High replaceable wood sides to match the lines on the jeep.
I will be adding:
1. Uni-strut interior rails on the sides and bed.
2. A triangular tongue tool/storage box.
3. Three Jerry can holders for gas and water on the outside.
4. One propane bottle holder for the grill/heater when camping
5. Load-bearing torsion box cover
6. Removable rack for carrying sheet goods and lumber

I used it the first day I owned it to haul some granite and paint for the bathroom and it will be full of doors and windows on Friday.

House Status and Plumbing Woes

April 27, 2016 / Matt Talley / Leave a comment

We are making progress, abet slowly:

My father-in-law came in this weekend and painted our bathroom and the trim.
I have a new granite vanity top installed – one with the facets centered on the sink.
New reproduction 1920’s glass handles are installed in the vanity. I is not gud counter. I bad at numbers. Didn’t have enough – one short. Store now sold out. Amazon to the rescue.
The drywall should completely done and sanded as of today. The new arches are super sexy!
I modified the kitchen knife rack to fit the new ceramic sharpener. The original was broken by the asshat moving company and Kyocera doesn’t make that size anymore, so I had to drill out its assigned slot. The replacement knives (also the movers…) are now in as well.
Primer will go on the fresh walls tonight and tomorrow night.
I have patched the hole in the tub surround and am waiting for the thin-set mortar to dry so that I can lay the tile.
The new fireplace insert is in and fantastic. I will do the new surround and mantel after the floors are refinished and as I am trimming out the Dining room Ceiling
I met with the garage foundation crew on Monday to go over all the details and they start the ground work today. I am almost giddy with excitement.
My new dutch doors are ready and I will pick them up Friday
The finish carpentry trim-out starts next Monday.
I learned yesterday afternoon that no plumbing permit was pulled and that we might have to demo the concrete in the basement – the new concrete – and the newly laid supply line so that the county inspector can view the pipes. I am super unhappy and will update as I know more.
We are now 4 weeks without a shower or bathroom sinks at the house. I have been a decent human being and fairly understanding up to this point with our plumbing company (big company, one of the oldest in Seattle). I am afraid that they have mistaken nice for weak and unwilling to have a confrontation. That was a miscalculation. Please refer to the Capone quote concerning kindness…
My wife is still medium chipper and hasn’t threatened to leave me yet over the lack of a shower or all the dust, so that is something.
The lavender out front is in bloom and the bees are back, so not all is lost.

Story Time – A Small Remodeling Success

April 14, 2016 / Matt Talley / Leave a comment

I am super proud of this door. It is original to our 1928 house and at some point in the last 88 years was removed from a closet or from somewhere in the basement and stuck in the rafters of the garage were it was covered in something near a ¼” layer of dust.

We built a stairwell to the attic and needed a door. I was all ready to source one at Second Use or Earth Wise, but at the last minute, I remembered this beauty and it was the perfect size (28″) I needed. For a jamb, I cut down one we had just pulled out of what is now the dining room. The door knob plate is a perfect match to the others in the house, which is awesome as it would have been impossible to find another one. I did source a vintage lock, brass strike plate, brass screws, and 1920’s glass knob at one of the local vintage building supply shops – both match what we already have all over the house perfectly. The job to install the lock, attach the knob, and mortise in the strike plate took all of 30 minutes and in a year, no one will ever know that the door hasn’t always been there or about its long dormant sleep in the top of the garage.

I am really happy to have this original piece of our home hanging there again. The trim went on to match the other doors and now just needs to be painted. I will do so after painting the walls and with the rest of the trim in the room.

House Remodel Status – 4/12/16

April 12, 2016 / Matt Talley / Leave a comment

Things are moving along with the house and garage, abet very slowly.

I cut the dying vine maple out of the back yard. Its loss made both my wife and I sad – we loved that tree. Part of it I saved for fire wood and part I gave to a local bowl turned I know so he could make beautiful stuff out of the sections that were free of rot.
The new 1″ water supply line is in.
Our basement slab was cut for the new basement bathroom and drains
Concrete floor re-poured.
I have demo’ed part of the basement ceiling, the front bedroom closet and a huge spot in the dining room for the plumbing company to run PexA supply lines and vent pipe.
Plumbing rough-in is going on today and we may have a functioning toilet and kitchen sink by 5:00pm tonight – maybe…
We haven’t had water for a week and have been staying in an air B&B, which has gotten old and expensive.
Basement bathroom framing is going in tomorrow.
The new 1st floor bathroom vanity is done and in place, but the holes in the granite top for one of the facets are cut wrong – it has made me a little crazy…
I have cleared all the stuff out of the way in the back yard and am ready for dumpster deliveries. I am taking the old garage out this coming weekend.
The attic is ready for new floor joists, but still waiting on the engineer’s report to decide what is going in and options for the space. We had wanted a Master Suite up there, but are not sure if it can be done at this point.
Our fireplace insert goes in tomorrow and the new fireplace tools are already there.
The three windows for the garage and two for the house are on order and should be here next week. I just have to find a place to store them.

Some pictures of the current status and the latest progress:

I haven’t had a day off in about three weeks – working my day job, making calls to contractors and supply companies at lunch and on the way to work/home, and working at the house at night and on weekends. I have to work all this week getting ready for the garage demo and all weekend tearing it down. It is all starting to take it toll on me. I’ll get an evening off from remodel this week to attend my new advanced throwing (pottery) class, and will have a two evenings off next week while the drywall goes in, but will be back at it painting the entire weekend of the 23rd and every evening the rest of the week after.

My wife said a little something a few days ago that resonates: “Life is a journey an not the destination, but remodeling is all about the destination. The journey sucks!” I swear if I had to make this decision again, I would have sold the house and bought a McMansion in Maple Valley or an updated mid-century rambler Bellevue and just moved right in in. I have remodeled many homes in the past, but this one and the size/scope are both out of hand and way too ambitious for someone who has a day job. When all is said and done, I do not want to touch a thing in or on the house for YEARS and would like to just enjoy home for a while, sit in the back yard and drink rosé in the summer sun with my wife.

Making usable stuff with fire and dirt.

February 28, 2016 / Matt Talley / Leave a comment

As an update to my original post about the pottery class that Stamps-With-Foot gave me for Christmas, I have made a bunch of little pots and am in the middle of firing and glazing them. Really unhappy with the red glaze that is available, but the milky white one is great, so I am doing the majority of the pots in that color.

I plan to make 8-10 coffee cups, a set of matching puppy water & food bowls, and a number of honey pots before the end of the 10 week course. I have 4 coffee cups that have handles on them and that are drying now, waiting to be bisque fired. I’ll turn wooden lids and honey dippers for some of the cylinders and give them as Christmas and birthday gifts if they turn out well.

Progress thus far:

Project built for my truck – the one I sold 2+ years ago…

February 26, 2016 / Matt Talley / Leave a comment

So this post is a little bit delayed. It has been sitting in my draft folder for almost three years. It may be time to publish it…

My 2011 Nissan truck had a very cool really system for holding gear in the back of the truck: an extruded aluminum track along the side rails and two in the bottom of the bed. They made sliding tie points for use on the rails that were great for some stuff, but I needed more to really strap a load down when hauling brush and debris to the dump. I looked at buying more from Nissan, but they wanted >$200 for the set of 4. No thank you! I did what any engineer would do: Designed my own and went into the machine shop and made a few prototypes out of aluminum scrap that was laying about.

I made one version with an offset bend for the side walls and the other with a 90 degree bend for use on the bed floor rails. I might change the latter a little as I found that while a standard small ratchet strap or rope had no effect on it, if I used a large ratcheting load strap, I could bend it.

I also found that the rails were the exact same dimension as commercial uni-strut (standardized formed metal structural system used in electrical, plumbing and HVAC installations for structural support). Parts are available at all the Big-Box home stores and I was able to pick up a bag of 10 threaded nut plates for ~$8.00 and 1/4″ hex-head bolts of various lengths for another $5.00. The prototypes worked so well that I made more and with my hold down solution and the OEM tie points, I could haul anything I really wanted and make sure it was securely fastened: Refrigerators, lumber, yard trimmings, fire wood, trash, you name it.

I added the side walls of a wooden shipping crate to my new truck bed system, bolted directly to the side rails using the uni-strut nut plates and then strapped over the whole load with 2″ straps. I found the installation took me 15 minutes from start to finish and it made dump and material runs super simple. It was even faster to remove and store in the garage so I didn’t drive around town like I worked for Sanford & Son.

I sold the truck in December of 2013, but I kept the OEM Nissan tie points as well as the ones I made. I will use them on my next truck, or possibly my next trailer. I will just install uni-strut on the sides and on the deck and I will make it that much more useful.

Making pots, cups, and bowls from sticky dirt

January 7, 2016 / Matt Talley / 1 Comment

My pretty wife gave me a pottery class for Christmas. Tonight was the first night. I made three “cylinders” and I am apparently “great at centering…” no idea, but I like the class and want to make a bunch of stuff. Will cruz Pinterest for ideas later.

Getting a new garage in 2016!!!

January 7, 2016 / Matt Talley / Leave a comment

Woohoo!! It looks like we are a go for a new garage and some needed updates to our heat, plumbing, and wiring at the house. I am meeting our builder this weekend and passing him a check (two checks actually, one is for the City of Seattle permit office…) and I will have a real garage and wood-shop by spring. I will have room for a big lathe, cabinet saws, wood storage , my joiners workbench, room to assemble projects/furniture, a real dust collection system, and all my planes/saws/chisels/hand tools on one side. On the other side of the shop will be a mini-machine/fabrication shop with a two post lift, lathe, end mill, welder, mobile paint booth, and work table…

I cannot tell you how stoked I am! Seriously, I am all giddy about it. I plan to make cool stuff, descend into super-nerdy, and will be voiding the shit out of warranties!

Here are the prelim drawings that are being submitted and a lay out of the shop floor.

Update:

Drawings sent to the city. Cross your fingers and pray with me that Planning is having a good day/week/month and these babies get a stamp.

Back in Seattle! Let the projects begin!!

November 30, 2015 / Matt Talley / 1 Comment

After two days of flying with a couple of heavily sedated French Bulldogs, we made it back to Seattle just in time for a home cooked Thanksgiving dinner. We are so glad to be back in our little house! The now sober puppies have staked their claim in our yard, we went to a few of our favorite neighborhood shops and *gasp* went shopping at Target on a SUNDAY *second gasp*!! In France, shopping on Sunday is a mythical creature that is spoken of in whispers. We miss Toulouse and our friends there already, but it is nice that things are sooo easy here.

The cold, rain, and ice was here to greet us, so in the interest of keeping Stamps-With-Foot happy, my first duty was to spend about 6 hours raising our hot tub from its long 2-year sleep. I cleaned it out, rinsed it twice, scrubbed it, filled it half way and ran the pumps, drained it, scrummed it all down again and then filled it to the top. They pump and heater fired right up and so far they are no leaks, but I will kaap a watch out for a while yet. It took about 4 hours for the water to go from 47 to 104 degrees and the temp has held steady.

We use BaquaSpa instead of Chlorine, so I loaded the tub up with a shock treatment after the it had come up to temp and had been circulating for 24 hours. I waited a few hours before taking a water sample into the local spa shop for testing. All good: just needed a little Oxidizer and to increase in the calcium. Wife happy – she sat in the tub yesterday for about an hour like a proper Japanese snow monkey.

I also just “happened” to stop in at Second Use and picked up a couple of painted fir corner cabinets that I have been eye-balling from afar. They will go in our living-room and replace the originals that were pulled out years ago by an unthinking previous owner – I can’t not work on the house. My Father-in-law, the Chatty Buddha, was here for Thanksgiving and I roped him into helping me wedge them into my tiny and very full shop. They will sit there until spring. Also thinking about re-installing an ironing board cabinet in the basement and a phone cubby in the upstairs hall. I have a problem…

Wood Lathe for sale in Cornebarrieu – SOLD

November 7, 2015 / Matt Talley / 1 Comment

The move is ON! we have two weeks until the packers and movers get here and Stamps-With-Foot and I spent the morning and part of the afternoon going through stuff and listing stuff for sale the largest of which is my lathe. It hurts me a little to see it go, but I know that a huge old gap-bed lathe waits patiently for me in Seattle.

Below is the add that my wife is posting on the local English-speaking forums here in the Toulouse area:

FAR TOOL TBF 1000 Wood Lathe for sale in Cornebarrieu:

I bought this lathe brand new from a local shop 18 months ago. Since it came unassembled, I reinforced the standard steel base with additional shelving, cross-braces to remove any possible flex. I then sheathed three sides for extra rigidity and added a strong bottom platform for ballast. I have turned everything from honey dippers, to bowls (large, small, & huge), stools from tree trunks, stair balusters, platters, furniture feet, tiny wooden and acrylic ornaments, lids, etc. It has been a great lathe and has NO PROBLEMS or “small issues.” The bearing are true and tight and there is ZERO rust on the ways/bed. This lathe is in perfect shape and the only reason I am parting with it is because we are moving back to the US and the power there will not work with the lathe’s 240/50Hz motor.

Here are the details and specs as well as a couple of links to shops that sell it:

Cast iron variable speed lathe features a 360 degree swivel headstock.
Solid cast iron headstock and lathe bed construction.
Extra bed extension for outboard turning.
Speed is fully variable between 450 – 2100 rpm.
Weighs ~120 kilos
300mm width capacity over bed and 900mm between centers.
Have turned 600mm platters with headstock swiveled 90 degrees
550W enclosed fan-cooled motor
hollow self-ejecting tailstock with #2MT
Cast iron offset tool rest and extension arm
Head Stock has MT2 Taper and 25.4mm (1:8TPI threading – industry standard for lathes this size – easy to find chucks and accessories
Includes reinforced/enclosed steel base, added powerstrip for lights and hand sanders, a 4-prong drive centre, bowl/platter faceplate, live tail center, 4 wrenches, knockout-bar, shop-made stead rest.

It will be perfect for your garage or shop or for your partner’s Christmas present since it is ready to work and you just have to plug it is. I paid 520 Euros for this lathe 18 months ago and it currently lists for 550 – 745 Euro depending on the shop. I am asking 375 Euro. Please give me a call if you have any questions and the lathe is available for demo if you would like.

UPDATE:

I sold the lathe to a nice English gent, who got a smoking deal. I helped him take it all apart and put it in his car. The rear springs were seriously loaded, but he looked happy as he pulled out of our drive.

Driven Outside

Tag: Delusions of Adequacy