Earlier this year, while we were finishing the attic, I took a weekend and built a cherry and ash laminated canoe paddle at the Camp Beach Center For Wooden Boats shop – as my own wood shop was in full use for the attic/storage. It was a little bit of a rush build and after paddling with it once, I decided to rebuild and reform it into a better performing paddle. This video will take you through all the steps of the initial build and the refit. The next video in in this series will show the finish steps and some on-water testing.
Category: Friday
Film Friday – 3D Printing a Pen Case
Being a pen geek and needing to practice on some new 3D design software I need for my new J-O-B (another post about that later), I decided to build some small parts that held my interest, one of them being a pen case for my Kaweco Lilliput pens and my Fisher Space Pens that would fit in one of the tin boxes that the Kawecos come in. I spent a little time in CREO and used an over-worked and not well loved/cleaned 3D printer (not my personal printer) with some REALLY old PLA, which you can see by the gaps and gobs in the printed pieces – not perfect, but they will do. I spent about 40 minutes drawing the two versions and spent maybe $4.00 in electricity and material. At the end of it all, I know where all the needed tools are in CREO, I have a new pen case, and I have leveled up in my nerdiness.
Film Friday – BEES!!
My wife bought me a package bee hive box kit for Christmas last year, which reinforces the fact that I have a wife that is kind and considerate and pretty damn adorable.
Anywho, I thought that installing a new hive would be a terrific opportunity to document all the steps to install bees into a new hive box. I went with a nuc hive instead of packaged bees and a new queen. That is for a later video. The whole process of bringing a new hive into the apiary also allowed me to show all the steps in prepping the pre-built hive boxes/parts and I was able to build and showcase a couple of steel hive stands that I have been thinking about and designing in my head for years. I will also make a video on the design and build of the hive boxes and parts, but that will have to wait until this winter.
I love bees and I love being a beekeeper. The honey isn’t bad either…
House Painting – Attic Installment
I documented the process to paint the attic conversion that we have spent a couple of months working on. I am using a Graco airless spray rig that I bought a few years ago at a big box store. It has paid for itself MANY times over. This is part 1 of a 2 part video series. In this one, I sprayed the drywall primer and the trim paint. For paint I only use Benjamin Moore. It is my favorite to use and it wears amazing – not cheap though. Wear your mask and keep your lungs healthy!
Film Friday – Organic Lawn Torch
Dandelions are my lawn-nemesis! Their only redeeming quality is that they make pretty colors when they burn and my wife left me without adult supervision after letting me drink more than a little rose in the afternoon sun. This is what happened.
Film Friday – Double Feature: Attic and Bath Remodel Status
I spent two FULL days, with a little help from my wife, instaling the baseboard, door, skylight, stair, and window trim in the new attic space. This video includes a few tips and tricks along the way. As this will be my wife’s studio space, she put in some sweat equity filling nail holes, doing a little sanding, and she chose the paint scheme. I will be painting next and will document that whole process as well.
This is Part 1 of our basement bathroom build/finish. We decided to add a basement bathroom when we replumbed the house a couple of years ago. 6 months of chaos insued and we took a two year break before diving back into the bathroom build. This time has been SO much better. We went with white subway tile for the walls, black and while hex tiles for the floor, and charcoal grout. The next step is trim, paint and fixture install.
Film Friday – Attic Remodel: Week 7
This is the last of the weekly updates for the Attic Remodel Project. The heavy work and drywall is complete and I will start trimming and painting the space this week (nights and weekends as I have a real J-O-B) so that my wife will have a studio that is full of light and opportunity. The next and final installment of the attic build will show all the paint and trim steps, some tips & tricks, and will be a few weeks away.
Attic Remodel: Week 6
This week, we went from bare studs to insulation to wiring to drywall with a dash of new windows thrown in for good measure. The HVAC split unit head vacuum & power lines were installed and we had a serious accident in the attic that occurred during that process.
Film Friday – Attic Week 5
We made huge progress in week five of the attic remodel, even with a couple of setbacks. The windows still are not in, but that is due 100% to the weather. I had an angry cold/flu and my thoughts about getting a little further along that weekend turned into hopeful, but unfulfilled fiction.
Film Friday – Week 2 of the Attic Rebuild
I know… I have been posting a bunch of videos lately and not a lot of travel, Jeep, Puppy, garden, music, building, or other normal posts. That will change with the coming of Spring and the completion of our attic remodel/rebuild. In that vain, below is the short video documenting week 2 of the process. It looks like it will be a 5-part series.
Film Friday – Mt. Rainier
I am way behind on posting. My J-O-B, video making, house remodeling, class I am taking, and general nerdiness has me swamped. But…. I flew out of Seattle a little while ago and made a little film that has a fantastic view of Mt. Rainier. Enjoy.
Film Friday – Framing Double Feature
We are remodeling and rebuilding a 90+ year old attic into a master bedroom. This required completely rewiring to electrical in the attic, moving/fixing plumbing, building a complete floating floor, adding roof supports, etc… Below is thew documentation of the 1st week of the build.
Part I of a 2 part video on the replacement of a falling down 90+ year old shack of a carriage shed with a modern 24X24 garage. This was not a flat mono-slab, green field build. Lots of digging was required and a rebar-filled retaining wall and slab had to be poured in the middle of winter before the first wall could go up.
Film Friday – 3D Printing Projects
I have been doing some medium-serious designing, borrowing, appropriating, and just plain stealing some 3D designs and printing useful stuff this winter in between shop time, my J-O-B, building projects, and remodel projects. The video below details the printing and use of a couple of safety razor cases, SD card holders, and GoPro Session4 case.
Film Friday – An Update and a Little Ranting
A quick update about why I have not posted here on my blog or been on YouTube for a few weeks and how I have been spending my time: Roadtrippin’, some slight ranting, obscene gestures, naughty words, snowboarding, beer, some boats, a little 3D printing, and a sneak peak at the Jeep’s homecoming after 12 weeks in the body shop are all to follow.
Film Friday – Double Feature
I had a found (fly-away issue) DJI Phantom 3Pro sent to me as a gift by an awesome buddy – a SERIOUSLY awesome friend! I took a look and decided to rebuild the thing and see if I could get it back in the air. Here is that process:
From my second You Tube Channel – the one I use to share vacation videos and miscellaneous stuff – I present for your viewing pleasure: Snowboarding at Loveland and Winterpark in Colorado with great friends on MLK weekend 2018
As always, PLEASE hit the subscribe button if you like my content on YouTube. Thank you!
Film Friday – Oak and Maple Pizza Peel Build
My Father-in-Law, The Chatty Buddha, wanted me to make him a pizza peel and while I have built cutting boards and boat paddles, I hadn’t yet made a peel. I agreed, sourced the lumber from a local salvege store. It used to be flooring, but after some magic with the table saw, jointer, some glue, and a hand plane or three – he has a pizza peel that I gave to him for Christmas. I hope to be enjoying pizza from it for years to come.
Film Friday – Offering Candle Stand Build
As the weather has cooled down, there are some welding and fabrication projects that I need/want to take care of during the short, cold, dark days of winter. This short video details the fabrication of a steel votive candle or offering candle stand that I am built for my wife/our house. It is made to fit on top of the Prie-dieu that we brought back from France. The stand is made from 1/8″ steel channel and plate, though looking back at the video the plate might have been more like 5/16″ ish…
Film Friday – Another Hammer Re-Work/Repair
I had a tired, old, home-made, second-hand chipping hammer that was broken and had been so for years. So, I MIG-welded the busted joint, ground the transition, and added a reclaimed hickory handle, which came from a hatchet rebuild shown in a previous video that I posted on YouTube. With the re-weld and addition of copper handle rivets, it should last a few decades now.
Film Friday – Home Garage Car Lift Details
The short film below is part on my on-going series on YouTube discussing and showing my garage/shop build process. It details my experience of having a 2-post Rotary Revolution RTP10 vehicle lift, why I went with the type/brand/style that I did, thoughts after using it for 9 months, and what I might do differently if I could go back in time.
As Always, likes are really appreciated on my YouTube Channel!
Film Friday – Blacksmithing and Forging
I am a novice smith and that is being generous. I do like to forge though and it is awesome when I get a little time to make things for myself. This short film details a couple of the different type of hold fasts (metal work and word work) that I recently made at the Pratt Center for Fine Arts forge in Seattle. If you live in Seattle, have a single maker bone in your body, and haven’t checked them out – do so immediately and sign up for a class or two.
Film Friday – The Garage Sidewalk Pour
Below is a short film documenting all the steps taken in pouring a walkway between our existing patio and my garage/shop, as also discussed in less detail in a previous post. I MAY have overbuilt it… a little… maybe…
Film Friday – Snowboarding Prep and Blooper
Winter is coming and Washington is supposed to get lots of snow. Consequently, I spent 30 minutes the other day waxing my board and finding all my errant gear. I also made a little video documenting my last pre-hip-surgery ride and the bloopers that ensued from riding when I should not have been.
Film Friday – Jeep Paint Prep
…And so begins my plan for interweb domination… This is the 1st in a series of videos detailing my Jeep re-painting project. I am doing the prep work and getting ready for my 1986 CJ-7 to go into the shop for a little cosmetic make-over. It was painted black at the factory in Toledo, has been black ever since, and will stay black until they make something darker. I also give a little bit of an update to what I have been up to of late, some projects that are in the works, and a quick pan view of part of a dirty, disorganized, and cluttered shop.
Forging and Fabricating
I can do and make bunches of stuff: Everything from joinery to electronics, from wood turning to machining, from bookbinding to electrical, from carving to heavy machine operation, but there are certain things that I have never really been able to do in the world of hand-craft, mostly due to lack of exposure or instruction. Chiefly among these things are/were forging/blacksmithing and metal shaping. The latter composed of shaping and bending sheet metal into forms and objects.
I decided this year to work on those deficits and have been taking some forging and fabrication classes at The Pratt Fine Arts Center in Seattle. A couple nights a week, I leave work and hammer, shape, weld, grind, and make stuff out of steel. I have been at it for 5 weeks and am really please with both The Pratt and all that I am learning. I have also learned that while I have dipped my toe in these waters, that there is a ocean of knowledge out there. I do not have any want to be a full-time blacksmith or fabricator, but I want to keep learning, so I can add some of the techniques and pieces to stuff that I already build and add to my repertoire of ability and understanding. Below are some of the pieces that I have made, tools I am using, and some stuff that I am working on. I am putting together a little video as well.
Film Friday – 41st Annual Port Townsend Wooden Boat Fest 2017
Below is a short film documenting my visit to this year’s Port Townsend Wooden Boat Festival. I lived up to my promise to Stamps-With-Foot again this year and did not buy a wooden sailboat, but there was 2-3 in my price range (and about 100 waaayyy out of it…) that made me drool.
Film Friday – A Tour of a Kayak Museum in Portland
Film Friday – Hammer fix
We are well on our way to becoming a doomed and disposable society. Example: After trying in vain to buy a handle replacement locally for my broken framing hammer, I had to buy one online and have it shipped to Seattle from the East Coast. I didn’t need the fancy matching OEM handle. Most any would have worked with a little shaping using a rasp and file. Neither Home Depot nor Lowes sells replacement handles for hammers or hatchets anymore – just handles for garden tools. I had four people try to sell me a new hammer while searching though. Apparently, just spending $80+ is easier than fixing a tool with a replaceable part designed into it. Lazy mother f….. Son of a …
The hammer holds no special value or spot in my heart or personal history. It wasn’t smuggled into the US 300 years ago by a ancestor who built and defended his home with it… Nope, just a framing hammer that someone gave me once. It had already been used and abused for years before it fell into my hands. The point was/is the thing is mine. A tool that I use to make stuff with. A tool that is MADE to have the handle replaced and somehow there are not enough people with the skill and drive to do such a simple task to keep them stocked on the shelves of multiple large national chain building supply stores. I stand by my statement that the movie Idiocracy is a documentary filmed by time travelers.
The whole replacement cost me $12 for the handle and shipping + 20 minutes of my time. A lot better deal than $80+ for a new hammer. As an added bonus, I get to rant a little and make a slide show 🙂
Going Topless
I made a short film showing all the steps in removing the Hard Top from my 1986 CJ7 Jeep for the first time in 1.5 years. I couldn’t round up the help to pull it off, so I put on my thunking’ cap and used the lift. The garage is a MESS, but my excuse is that we are still remodeling the house and it has been a wet winter and spring so there are materials and projects in work everywhere.
Film Friday – Corner Cabinet Up-Cycle/Rebuild
Way back in November of 2015, just after our return from living abroad for two years, I bought a set of hard used, little loved corner cabinets from a local salvage place. I have spent an hour and there installing, building trim, sanding, de-gunking, stripping old paint, priming, painting, and more painting. It has only taken 18 months, but they are now installed and look like they have been in our living room since the very first day.
Here is a slideshow/video tale of the steps taken in the project: What it was to what it became.
Film Friday – Sailing Video Adventures
I follow the YouTube feed/adventures of three around the world sailors. Thought I would share: