Kitchen Island – Update

It has been almost a year since I built (with help from The Ruminator) Stamps-With-Foot a kitchen island and she has loved it (so I am told) and used the bejesus out of it.  I made a couple of additions and there are a a few observations:

  1. The wood I used as the base platform shelf was REALLY wet and I put 1/16″ spacing between the boards.  WAY too much.  I should have wedged them in as tight as possible because they have shrunk and now I have 1/8 gaps in a couple of places.  No big deal since it is tongue and groove, but I don’t like spacing that large.
  2. I installed an Arkansas Razorbacks bottle opener on one of the legs.  It was required.
  3. I had used a hunk of cherry tree trunk/firewood and turned it down as a lid/plug for the scrap hole.  I turned it too large since it was really wet and was bound to shrink/warp/crack.  My best guess is that it is done moving, so I put it back on the lathe and turned it down to size and changed the profile a little.
  4. The rolling pin is a great towel holder, but I should have/need to stop it from rolling – the towel slips off and onto the floor occasionally.
  5. I also originally finished the plug with walnut oil, but it gets handled a lot by wet hands and I had to oil it every couple of weeks.  This time I finished it with 3 coats outdoor polyurethane and then added a coat of wax.

 

Matt Talley Kitchen-Island-France-2014-1-262x300

Matt Talley - Projects 2015_03

Matt Talley - Projects 2015_02

Matt Talley Kitchen-Island-France-2014-2-300x263

Matt Talley - Projects 2015_29

Some small projects around the house

I have been swamped with work and travel for the last couple of months, so my shop time has been very limited. I have mostly been puttering around with my workbench, getting the last bits and bobbles done before calling it done and I have spent the off hour here and there on the lathe and doing stuff around the house:

  1. I had to fix a dishwasher leak and do some painting in the kitchen – still hate plumbing
  2. We did some re-arranging, so I had to fill some nail holes and then make new ones.
  3. Glued a cutting board back together after it split – craptastic glue didn’t hold, so it is back in the to-fix pile and will get some dowels this time
  4. Made a pot lid handle out of some scrap cherry.
  5. Tackled the jungle that was once my yard – twice
  6. Sharpened the lawnmower blade
  7. Turned the compost
  8. I bought a sheet of plywood and built a DVD shelf and a 8′ bookshelf for the lending library we run.
  9. There was been an oak log in my shop for months so I cut it in half and made a couple of stools for my office.
  10. Our puppies play a game called “run away from Mommy” when she takes them out, so I built two small fences to keep them in the back yard and away from the front gate.

I have do a few things in the shop just for organization and am working on a couple of little projects:

  1. We got a huge free wardrobe that I put in the GROP to organize non-tool/shop related items like climbing gear and life jackets
  2. My battery operated tools need a home, so I put together an organization center for them that mounts on the French cleat board
  3. I hung up my 6 heavy panel clamps to get them out of the way
  4. Made a Lathe chuck and tail-stock tool organizer for the French cleat organizer
  5. With a bonus from my J-O-B, I bought a few more molding planes, but they arrived in sad shape. I spent 6+ hours one Saturday cleaning, sharpening and fixing them.
  6. Started work on a blanket chest rebuild: cut here, snip there, new runners and new feet. Will get new milk paint finish when complete.
  7. Working on a copyist lectern rebuild. I made the base, pillar and other bits from some scrap beech left over from the bench build.
  8. Built a wooded top for the puppy Kennel so it blends better with the furniture in the Living Room.
  9. Putting together a 6-board chest for molding plane storage.  Will get re-purposed forged hardware and a Barn Red milk paint finish.

Matt Talley - Projects 2015_06 Matt Talley - Projects 2015_11 IMG_3410 Oak stool 23-2015 (2) Matt Talley - Projects 2015_24 Matt Talley - Projects 2015_22 Matt Talley - Projects 2015_23 Matt Talley - Projects 2015_25 Matt Talley - Projects 2015_17 Matt Talley - Projects 2015_18 Matt Talley _ Drill Organizer _ 2015

My workbench is DONE!!

I am about a month late in posting this – life and my J-O-B got in the way – but the Cornebarrieu Bench is done. Completely done! All bells and whistles added. It seems like it took me forever, but it fits perfectly in the shop and I started using the bench even before it was finished. I am very happy with the outcome and am currently working on projects that have been piling up all winter. Just in case you haven’t been following along for the past year and a half or so:

My GROP (garage and shop combo) in Seattle was too small for a proper joiner’s bench. I made due with a slim, high, wall-mounted work counter, a bolted on machinist-vise, Quick Clamps, and the top of my table saw. It worked – mostly/sort of – but was a pain in the ass a good bit of the time: I never once planed a board on a stable, solid surface. My GROP here in France is roughly the same size as the one in Seattle, but is absent the huge cast iron machines and saws. I have some room to move and finally have the space for a big, heavy, proper work bench as well as some time to build one – or so I thought.

It is an amalgamation of benches by M. Roubo, Roy Underhill, Chris Schwartz, and Bill Schenher. I am calling it the “Cornebarrieu Bench” after the small village in southern France where we live, where the lumber has been sourced, and where the bench was made and first used.

For anyone interested, here is a documented build process, build notes, and step by step guide – 115 steps – to build this beast.

Cornebarrieu Bench 2015  (30)_sm - Copy

Cornebarrieu Bench 2015  (31)_sm

Cornebarrieu Bench 2015  (29)_sm - Copy

Museum of the History of Paris – a MUST see

The Musee Carnavalet (The History of Paris Museum) is a hidden gem! It is off the normal well-beaten tourist path and within walking distance from St. Eustace Church and the Picasso Museam. It is full of treasures including an entire Alfonse Mucha designed jewelry store – see pictures below. It made me feel all funny inside when my wife drug me there. She tried to get me to go with her this summer , but I wanted to do something else that now escaes me. I should have listened to her. There are 100+ rooms of paintings and sculpture, models, furniture, and good stuff to gawk at.

Set in a series of old Parisian town homes and Orangeries that are all put together with walkways and joined gardens. One of the cooler aspects is that you wander through re-creations of rooms from the French Revolution to the Paris Commune, and enter into the private spaces of famous Parisians like Marcel Proust’s bedroom with his brass bed and his little table covered in pens, ink, and notebooks. As I said, I was drug here the first time, but it is on my list to visit now even if I am in the city alone for a few hours. It was not too crowded at all and the gardens are a really nice place to sit in and catch up on your travel journal entries. Did I mention that the admission is free?!

History of Paris Museum - 2015 (35)

History of Paris Museum - 2015 (36)

History of Paris Museum - 2015 (37)

History of Paris Museum - 2015 (38)

History of Paris Museum - 2015 (39)

History of Paris Museum - 2015 (40)

History of Paris Museum - 2015 (2)

History of Paris Museum - 2015 (3)

History of Paris Museum - 2015 (4)

History of Paris Museum - 2015 (5)

History of Paris Museum - 2015 (6)

History of Paris Museum - 2015 (7)

History of Paris Museum - 2015 (8)

History of Paris Museum - 2015 (9)

History of Paris Museum - 2015 (10)

History of Paris Museum - 2015 (11)

History of Paris Museum - 2015 (12)

History of Paris Museum - 2015 (13)

History of Paris Museum - 2015 (14)

History of Paris Museum - 2015 (15)

History of Paris Museum - 2015 (16)

History of Paris Museum - 2015 (18)

History of Paris Museum - 2015 (19)

History of Paris Museum - 2015 (20)

History of Paris Museum - 2015 (21)

History of Paris Museum - 2015 (22)

History of Paris Museum - 2015 (24)

History of Paris Museum - 2015 (25)

History of Paris Museum - 2015 (26)

History of Paris Museum - 2015 (27)

History of Paris Museum - 2015 (28)

History of Paris Museum - 2015 (29)

History of Paris Museum - 2015 (30)

History of Paris Museum - 2015 (31)

History of Paris Museum - 2015 (32)

History of Paris Museum - 2015 (33)

History of Paris Museum - 2015 (34)

Art Nouveau Desks and Furniture at the Musee d’Orsay

We were recently in Paris and we had 4 hours to kill before our train left for Toulouse. We decided on a visit to the Musse de Orsay. Excuse me while I mount my soapbox: If you go to one museum in Paris, let it be this one. Go early, get the audio tour and plan on a half day. It is full of impressionists: Monet, Manet, Corbiers, Toulouse Letrec, Van Gogh, etc… the sculptures are breathtaking – on pare or better than those found in Florence or in the Vatican. Dismount soapbox.

We concentrated this visit on a couple of painting rooms and the Art Nouveau furnishings collections. I have a serious weakness for fine furniture. It is genetic – both side of the family. I have been to the exhibit before, but I wanted some quality time with it and my wife happily agreed. The downside to any visit is that whenever we go and Stamps-With-Foot sees anything remotely Art Nouveau related, she is almost unbearable for an entire day: “PLEASE build me a bed like that!?” “Can we PLEASE have a door just like that…?” The collection is on the second floor on the left, directly opposite of the Seurat gallery – an artist near to my brother-in-law’s heart.

From the photos below, I WISH I had the time and skill to do the little chest with the linen-fold drawer fronts and the carved mice pulls.

Furniture - musee dOrsay 2015 (10)

Furniture - musee dOrsay 2015 (1)

Furniture - musee dOrsay 2015 (2)

Furniture - musee dOrsay 2015 (3)

Furniture - musee dOrsay 2015 (4)

Furniture - musee dOrsay 2015 (5)

Furniture - musee dOrsay 2015 (6)

Furniture - musee dOrsay 2015 (7)

Furniture - musee dOrsay 2015 (8)

Furniture - musee dOrsay 2015 (9)

Turkish Carpet Sellers

Carpet Sellers: I have purchased rugs and carpets from multi-generational vendors from Istanbul to Marrakesh, Casablanca to Chendu, Ankara to Toulouse. These men, always men, have spoken every conceivable language – especially the numbers – and have seen every bargaining trick known to man.

My wife is an expert haggler and has no qualms about walking away from a market seller and going to the next stall in full view of the first seller. She was in Marrakesh when I bought my first Moroccan Hanbel, but she didn’t do the actual bargaining – she drank the sweet mint tea and watched. It think this left a hole in the part of her soul that needs to haggle (the Burton side of her genetic pool) and she has been twitching to buy a carpet ever sense. I think that she wanted to bargain with the best of the best – to test her mettle and skill. Our recent trip to Istanbul provided her with that opportunity.

Our first carpet stop was at a 5-story establishment late one evening just before dinner near the Blue Mosque. We were handed off to a tall, greasy, smooth-talking seller that had spent lots of time in the US and was the picture of shady used car salesman. Seriously. We let him talk and lie and talk and lie. After about 2 hours and in the middle of what was probably his dinner time, we started negotiating prices. I really wanted a unique 5X7 kilim and Laurel was eye-balling a wool runner. The seller wanted BMW prices for the equivalent a small Honda with a tiny engine. Laurel gave him a final price for both and he unceremoniously ushered us out of the door. I really liked that Kilim and it became another “One that got away.” A shame that it did not go home with us… It will forever be like the hanbel (kilim is the Turkish word) in Essaouira, Morocco that I left folded on the floor there that still calls to me. Every so often my wife will say, “Remember that rug…” and we both get a little sad.

Our second stop was the next night and due to my schedule, we showed up 15 minutes before their scheduled closing time. No worries, three people stayed and tea and carpets and rugs appeared from all corners of the shop. My sweet wife busied herself inspecting a $3000 silk carpet that stayed in the store where it found her. Our seller was another guy that had spent some serious time in the US and although would also have been at home at any New Jersey used car lot, was more polished and a touch more upfront than our dealer the night before.

Laurel went to work on him. We were good-cop bad-cop right away. I was the bored, broke husband upset at my wife’s spending habits and she was the doe-eyed, sweet little girl who couldn’t make up her mind. She is awesome at that. We work the shit out of it and she was so good that she completely had me convinced that she wanted an entirely different rug – crafty that one is.

In the end she got an amazing small wool rug with insane knotting and detail for our bedroom and I got a small wool on wool rug for the living room. Now, we did not get the deal of the century, but we didn’t have to sell blood to finance our taxi ride back to the hotel either. We got a decent price, but make no mistake – the seller made good money.

My hope was that this one experience might satisfy her need to buy Turkish/Persian/Moroccan carpets… Nope. She talked about “the next one” on the taxi ride home. I have helped created a monster.

Turkish Rugs - 2015 (8)

Turkish Rugs - 2015 (4)

Turkish Rugs - 2015 (17)

Turkish Rugs - 2015 (1)

Turkish Rugs - 2015 (16)

Turkish Rugs - 2015 (15)

Turkish Rugs - 2015 (14)

Turkish Rugs - 2015 (10)

Turkish Rugs - 2015 (13)

Turkish Rugs - 2015 (12)

Turkish Rugs - 2015 (6)

Turkish Rugs - 2015 (3)

Turkish Rugs - 2015 (11)

Turkish Rugs - 2015 (7)

Turkish Rugs - 2015 (9)

Turkish Rugs - 2015 (5)

Turkish Rugs - 2015 (2)

New stools from an oak tree

This weekend I finished up a “little” lathe project I started in early February – I made a couple of stools out of a hunk of oak tree that was cut after a storm in our village. They are about 15.5″ (39cm) tall and 10″ (26cm) around and getting it that way pushed my Chinese lathe to its absolute max. It walked all over the floor when I first started it up – hence the kettle bells thrown on the middle shelf to add mass. It super did not like the out of balance logs. It would have been fine at a slower speed, but the slowest my lathe goes is 400 RPM and that is too fast for this size project. I managed, but there was lots of starting and stopping.

I really like both how the turned out and how comfy they are to sit on – just the right height for a quick stop-and-rest. I will add bow-tie joint if needed as they dry out and split, maybe out of some walnut that I have. They will make a nice addition to my home office.

Oak stool 23-2015 (2)

Oak stool 23-2015 (3)

Oak stool 23-2015 (1)

Oak stool 23-2015 (4)

Used my workbench today!

Today was the official first use of my workbench. I used it as a work table to lay out the shape of the leg vise, I cut the dados for the tail vise, cleaned them with a chisel, and after spreading plastic used the bench top as a glue-up table for the vice pieces. I had enough room at the other end of the bench to put together a French-cleat mounted battery drill organizer that I cut the parts out for yesterday afternoon. I have trouble staying with one project and do 3-5 at a time. It makes my wife crazy.

The bench top height is perfect and I am super stoked to have a real workbench here in France. I can finally get down to serious business and make some moldings and a small linen-fold panel chest.

Happy!

Workbench Progress

Progress on the Cornebarrieu Bench is coming along.  It has been slow going – I have been swamped with work, travel, lack of allowance (I spent it on Christmas and a classic fiddle/violin…), more work, etc…

Stamps-With-Foot gave me a gift card for our local Home Center/hardware big-box as a Christmas present that took care of the price for the last section of the top. I got a lot accomplished this last two weeks:

  1. The final sections of the top were glued up just before New Years eve- using every single clamp I brought to France and more than a little ingenuity.
  2. Installed (2 hours of cutting, drilling and chiseling) a pricey German-made cast iron end vice that I got on 65% sale – was missing two small metric bolts and the wood handle.
  3. Made final leg cuts: the tenons that go inside the bench top.
  4. Put 5/16 oak dowels in to the pieces that have cracked, even a little, to make sure that the cracks do not spread.
  5. Gave all the base parts an 80 grit sanding.
  6. Really like the sawmill marks on some of the pieces.  Am going to put clear poly on the base instead of milk paint to preserve the marks.
  7. The legs and stretchers shrunk and warped just a touch in the six months since I cut them even though I had it all clamped together.  It will be fine and could have been worse.
  8. Made the first dry-fit of the base to the top: Everything lined up , fit perfectly, and is as square as I could ask for.
  9. Drilled holes for connector bolts and lag screws.
  10. Installed base shelf cleats
  11. Cut the 12 sections of 5/8″ tongue & groove pine that will be the base shelf

Cornebarrieu Bench 08-2014 Cornebarrieu Bench 09-2014 Cornebarrieubench 12-2014 Cornebarrieu Bench 1-2015

 

 

 

 

 

 

Before I head to the US in a couple of weeks, I hope to have installed the end-vise block, given the base a 120 grit sanding, polyurethane the base &shelf, cut the hole for the leg vise screw and the rectangle cut for the vices’ parallel guide. I also want to install the leg vise nut in a pocket behind the leg while the bench is upside down.

Buying a Moroccan Rug: How-To

Below is a link to a PDF document that contains The VERY little I know about Moroccan carpets and how to buy them in Morocco. I put it together of multiple trips and years and thought I would share with the general public on the interwebs. Disclaimer: This work is not 100% mine. I have kludged together some of the knowledge and wisdom of others that has helped me in the search for my own carpets and have added my own thoughts, ideas, and text here & there.

I will say that the statements contained are not purely academic: I have perused Medinas and souks in Marrakesh, Fez, Casablanca, Essaouira, Rabat, Dubai, Ankara, and Abu Dhabi. I have purchased rugs from multi-generational vendors who spoke every conceivable language – especially the numbers – and who have seen every bargaining trick known to man. You have not lived a full life until you have seen a mustached Moroccan man and a tiny Chinese lady in serious heated discussion over the quoted price of Beni-Mguild, wildly gesturing with their hands while barking in Mandarin at each other.

I have also walked away from deals after bargaining for a couple of hours. There is a hanbel (kilim is the Turkish word) in Essaouira that I left folded on the floor there that still calls to me. Every so often my wife will say, “Remember that rug…” and we both get a little sad. I do not claim that I am the world’s greatest negotiator or that I have never been taken advantage of by a market seller – I have.

If there is someone out there reading this that feels my info – any of it – is wrong or misleading, write me, tell me what I need to know/change. I will update this doc and list them as a primary source in an endnote/footnote.

Buying a Carpet in Morocco V3

Chinese Lathe Build Update – Pimp My Lathe Edition

As mentioned in a previous post, I purchased a Chinese manufactured wood lathe shortly after moving to France. Putting it together and getting it running true was not a Herculean task, but it wasn’t a plug and play affair either. In addition to the initial setup, I have taken an hour here and there to make it bit more ridged and add some features that did not come stock, just to pimp it out a little:

  1. The base is now sheathed in 1/2″ plywood, glued to the wood supports and screwed into the sheet metal legs.  It makes the base a LOT stiffer and clean-up is much faster.
  2. After 4 months of weekly run-time, I have had to replace a couple of set screws and re-tighten the short bed extension outboard of the head-stock. The clamp bolt holding the head stock shattered and caused me some grief.  Chinese bolt quality sucks.
  3. The bottom of the base was finished with 2″ thick scraps and I added a couple hundred pounds of pavers, gravel, and crushed brick to add even more stability.  It is not enough when I try to turn a 15″ hunk of cherry outboard,  It still wobbles and jumps around a bit.  There is just no way to make the sheet metal frame more ridged.
  4. On the French cleats above the lathe, I added a tool holder and chuck/drive center/tail center tool mount for convenience.
  5. I hung a long compact florescent over the work area and on the side there is an IKEA floor lamp/spot light that I can move about.  Scored it used for $8.00!
  6. A tool grinder the I picked up for about $45 is mounted are the end of the lathe on a small table for easy mid-project tool sharpening.
  7. The capacity is only 12″ and that is not the magic number.  16″ – 18″ would be perfect for the bowls and bases and platters that I am doing here.  If I added 2″ iron risers to the head and tail stocks, then it would give me a 16″ turning capacity (swing).  I have thought long and hard about doing it, but haven’t yet as it might be a complication that is more headache than useful AND I don’t want to put anymore time or money into the thing.  I just want it to work.
  8. I designed a steel bed extension – modeled it in 3D and everything, but I am not going to have it made… I would be trying to turn an under powered Hyundai into a V8 4X4 Toyota Truck.
  9. For tuning large objects with the head swiveled, I designed a sweet swing arm tool post as well.  I modeled it up too, and decided not to have it built for the same reasons.  I will use the tool post arm that came with the lathe with a wood post under for support when I turn bigger stuff outboard.
  10. This Lathe will get me by for the next couple of years and I will go over it and repair/replace any worn parts before we leave France to ensure the next owner has relatively trouble free tool, but This is my last “cheap” lathe.  I am going to plop down some funds and get a Robust, Vicmarc, a huge Powermatic, Oneway, Oliver, or a Stubby – Something with power, mass, lots of heavy cast iron and reliable parts that I don’t have to screw with.

 

IMG_3410 Lathe Chisel rack 2014 Lathe clean aug 2014

 

 

Rainy Day Projects

I spent a few hours this past Saturday cleaning up and re-arranging the GROP. I had bits and pieces of projects strewn about everywhere and I had to wiggle my way in through both the garage door and the door from the house – like I was in need of a hoarder intervention. It just took a couple of hours and only two utterances of the F-word to make sure that my on-going and future tasks were staged for completion and arranged in an orderly fashion.

Months ago, I picked up an antique copyist’s lectern (the top part only) taken from a French Abby. It was in ruins and the wood was full of worm holes, but I saw treasure and have planned on rebuilding it “…when I have time...” This is what rain days are for! Running and biking would have beeen cold and muddy, the dogs wouldn’t budge from the warmth of the pillow filled couch, I had already slept late and there was serious wife snuggling, so might as well make some wood shavings!

I sketched up a few column profiles in my ubiquitous little black notebook (currently a Rhodia Webbie) and decided on a somewhat simple design that MIGHT have been found when the piece was made. It is not some object of high art – no Gothic arches, no carvings and it seems to have been made for a specific task which didn’t require flourishes. I tried to follow that ascetic and kept it all fairly simple, only using a gouge, parting tool, and skew to work the column. While my lathe is modern, the tools are the same that have been used since the ancient Egyptians turned on their horizontal lathes, so I figure that the re-made version would be recognizable to both the maker and user of the original piece – that and it feeds my own mild form of wood working OCD.

The lectern top is now stabilized and bug free after months of treatment and I spent a little time on Sunday turning a new pedestal out of beech scraps from my workbench build that I had. I glued them all up into a single 5″ X 5″ x 32″ hunk of wood. I then measured and turned matching intermediate supports so that it all blends in as one piece. I need to give it a good all-over sanding before I remove it from the lathe. What I have left to do before I call it done is to replace one book ledge, rebuild (or find at junk shop) the second tin candle holder to match the single original that is left, turn and fit the pedestal base plate, and then everything gets stained and oil-finished to match.

It will look amazing in living room next to the book press with a reprinted copy of one of the four volumes of Roubo’s L’Art Du Menuisier on one side and Viollet-le-duc’s Dictionary of French Architecture from 11th to 16th Century on the other side, tall beeswax candles in the holders… Jesus, I am getting nerdier with each passing year!

Lectern rebuild 11-2014 (1)

Lectern rebuild 11-2014 (2)

Lectern rebuild 11-2014 (3)

Lectern rebuild 11-2014 (4)

Free Wood is the Best Wood!

Prospects for Fall wood-turning are looking up!  I am 98% done with the Chinese lathe build-up into a proper tool. I am waiting on the arrival (had to resort amazon.uk.co as there are not turning shops in a 100 mile radius?!) of two huge bowl gouges and I will be set up to make shavings all winter. I was also given a free electric oil-filled heater for the garage, which should keep things toasty!  On the raw material front: I am taking an old apricot tree out of a small orchard for some friends a few villages away tomorrow (National Holiday) and I am really excited to turn some bowls and jar tops out of it.  A few weeks ago, I mentioned the project to a friend of my wife’s and a couple of hours later she called and said that her husband was cutting an old ornamental cherry down and would I like the wood? Like the Pope wants Jesus, I did!! I went over with the chainsaw and helped him take it down and to cut a few larger limbs and the trunk into sections.  Some of the images below are what it looked like inside the tree just after my chainsaw went through. We were stunned. Not just the center was beautiful – a fire purple, but there are bright reds and oranges in the outer wood as well. The tree had over 70 rings and grew next to a couple of big cedars so the rings are real tight and as I had to sharpen my chain twice during the cutting, the wood is VERY hard and dense.

It took two loads in the car to get it all home.  I sealed the ends right away and stacked everything in the GROP near the lathe. They had cut a plum down earlier this week and I scored two 12” rounds from that as well – the ones with the flame purple center in the pictures below. I told the couple that I would make them a vessel or large bowl out of a hunk of the tree in trade for the lumber.

Fast forward to this past Saturday: I rough turned 6 bowls (one not pictured) in about 2.5 hours from the large limbs. The trunk sections will be cut into starting next weekend.   I will let the small pieces dry for 4-6 months and then finish turning them. The larger bowls from the trunk will take a year to dry.

Am feeling reasonably optimistic about upcoming projects :-)

IMG_4075

IMG_4076

IMG_4077

IMG_4078

IMG_4079

IMG_4092

IMG_4103

 

 

 

 

 

 

 

 

Update 11-9-14:

Well, the apricot tree wood harvesting didn’t quite go as planned. I had chainsaw issues right away – needed to tear it down before the first cut and unclog the chain oil hole. Holy crap the wood was hard. It had 65+ growth rings that were stacked in tight. It was slow going with a couple stops to sharpen my chain. The clincher though was that there were two twisting veins of rot that went from crown to root ball with lots of bug damage spidering out from the rot as well. Dammit! There was was maybe 12” of trunk that I can spin a bowl out of. Per my agreement with the owner, I cut up the other trunk & big limb sections to a length that will fit in a fireplace and stacked it up for them. You win some you lose some. If not for this tree I wouldn’t have the amazing wood from the ornamental cherry and plum tree and maybe karma will smile on me the next time I lug my saw into a field.

Apricot Tree 11-2014 (3)

Apricot Tree 11-2014 (1)

Apricot Tree 11-2014 (2)

Home From Morocco

As mentioned in a previous post, my J-O-B sent me to Casablanca, Morocco recently for a few days. I had a free afternoon the day I flew in, so I headed right to the “New” Medina Market (the Old Medina is where the locals shop for fruit, fish, scarves, socks, underwear, etc…). I picked up a few things for gifts and spent almost 4 hours with a carpet merchant bargaining for two carpets and drinking glass after glass of hot, sweet, Moroccan mint tea. I can say that after haggling with carpet sellers in Marrakesh, that the carpet soul in Casablanca seemed almost laid back. The were no histrionics and the opening price did not equal the price of my first vehicle. I was pleasantly surprised.

Things turned out really well and I got a decent price for the carpets – 1/5 of what they go for in the US and half of the European mainland retail price. In addition to bringing back a horrendous cold, I also brought back a large red leather pouf and 1 square meter of Zellige tile for my sweet wife – she danced a little when I pulled them out of my bag. I got the tile at a giant outdoor bizarre that was full of used and new plumbing fixtures, tile, lumber, tools, doors, etc… It was like 2 Home Depots , a Lowes, and 10 architectural salvage places set up all their wares under tents in a football stadium parking lot. It was vast and cramped and noisy and awesome. I wanted to spend hours there, but it was getting dark and this pale gent doesn’t plan to get caught in a dark ally in the middle of a foreign bizarre after sundown, no sir. I got my tile and zipped away on the back of a borrowed scooter, piloted by a Moroccan carpet seller with a who had a schedule to keep – which is a whole other tale in-itself!

On the day before I left town, I had had a couple of hours and I went back to the Medina and bargained for a few cushions and pillow covers for my wife. Same thing – very laid back. There was nowhere near the selection, but it was worth it not to be constantly harassed and pawed at by sellers trying to drag me into the shop for a “special price just for me…”

Morocco_Casa 2014 (3)

Morocco_Casa 2014 (15)

Morocco_Casa 2014 (11)

Morocco_Casa 2014 (7)

Morocco_Casa 2014 (9)

Morocco_Casa 2014 (12)

Morocco_Casa 2014 (10)

Morocco_Casa 2014 (13)

Morocco_Casa 2014 (8)

Morocco_Casa 2014 (14)

Morocco_Casa 2014 (17)

Morocco_Casa 2014 (16)

Morocco_Casa 2014 (18)

Morocco_Casa 2014 (4)

Morocco_Casa 2014 (5)

Morocco_Casa 2014 (6)

Making Little Stuff Around the House

I have been remiss in posting for the last couple of weeks – my J-O-B has been sort of nuts and I have been trying to stay on top of things and stay employed 🙂 I have been putting around in the shop here and there at night before and after dinner though.  Recently I have completed:

  1. A salt cellar for my wife made from scrap red and white oak because I was tired of seeing the IKEA glass dish on the table.
  2. A jar lid or two for the kitchen.
  3. There have been a couple of honey dippers for turned gifts.
  4. Specifically for my wife, I made rolling pins for fettuccine and ravioli pasta (or pie crust if my sweet bride happened to want to bake me a lattice top apple pie…)  We had a friend who is a food blogger come over that LOVED them and I think that I am going to do one or two for her as well.
  5. I added some wood-bling to a plunger handle – Why have mass-produced stuff sitting around like everyone else when 8 minutes of lathe time and a little oil/wax turns the mundane into the custom.
  6. A glass bottle cutter so I can take the pile of bottles we generate and make candle covers, tumblers, and glass funnels for my wife and for Christmas gifts.  It was a non-specific request from her that has won me brownie-points.
  7. A book shelf made from a small 1931 cast-iron lathe and a hunk of reclaimed barn/house beam from here in France.  I cleaned both the beam and lathe up a little, added a little stain to the wood, light sanding, and a coat of poly.  I mortised in a couple of reclaimed oak runners to serve as feet and the keep the ends of the beam from splitting.  The lathe was then bolted down and I added one of my bowls to give the books a proper purchase.  The tool rest is turned and mounted on the other side to keep the books upright.  I think it looks awesome and everyone who have come over in the last month has either asked where I got it of how I thought of it.  Make my ego swell a bit….

 

IMG_3146 IMG_3144 Jar lid 8-14 Kitched 2014 IMG_3465 IMG_3897 IMG_3900 IMG_3302 IMG_3301

Inaugural Hand Tool Tuesday Post

Being a child of the 1980’s, my early tool and joinery education from my own father was augmented by two TV craftsman – Norm and Roy. I have a foot in each of their worlds: My table saw, miter saw, and lathe get the lion’s share of work done in my shop, but I am giddy whenever I can whip out a chisel, Japanese saw, or molding plane. My lathe gets a lot of press as it is my only power tool here in France and I recently realized that I am not highlighting hand tools enough in my shop work posts. Additionally, I see a lot of very cool old tools here in France that need to be shared. I will be posting pictures, videos, details, openions, thoughts, etc… here.

For today, enjoy Roy and Norm

Disclosure Note: The choice of the Roy video was solely due to the heady mix of Jefferson and Roubo. In the future, I will include more videos of people actually using the tools 🙂

Desk Fetish – Revel, France

I may have mentioned before that I have a certain unnatural attraction to desks – a lust if you will. We have five desks in our house in France home, three in our Seattle house, and I still NEED more. I love me a Victorian Wooten, a Danish cabinet-desk will cause me to pant, fire screen panel desks start me to sweat, roll-tops make me smile, and the smooth curves of an Art Nouveau model will make me twitch.

Whenever I travel or go to a museum or furniture shop, I have a wandering eye for desk-like furniture – I almost feel like I am cheating on my desks at home. It happened again recently, when I went to Revel, France on a road trip with my son and Father-in-law. When we got home and started looking at the pictures, I realized that more then half were of desks, desk drawers, the corner joint of a desk, image after image of drop leafs… I with we had more rooms…

Here are a few pictures from that trip:

Desks France Revel 2014 (14)

Desks France Revel 2014 (15)

Desks France Revel 2014 (1)

Desks France Revel 2014 (2)

Desks France Revel 2014 (3)

Desks France Revel 2014 (4)

Desks France Revel 2014 (5)

Desks France Revel 2014 (6)

Desks France Revel 2014 (7)

Desks France Revel 2014 (8)

Desks France Revel 2014 (9)

Desks France Revel 2014 (10)

Desks France Revel 2014 (11)

Desks France Revel 2014 (12)

Desks France Revel 2014 (13)

Small job for the neighbors

Just finished a curio cabinet rework/repair for my next-door neighbor. It was the husband’s parents and as best as I can tell/find it is from 1910ish. It was really well made and a fine piece of small furniture to display dolls, tea cups, and such. At some point, 2 shelves were added and the corner trim blocks were lost. I turned some 7/8″ X 7/8″ X 3/8″ blocks down, and added rosettes with a skew chisel point. As my neighbor was handing me the cabinet to install the blocks, he also asked that I put in a third shelf. OK… I used an old fruit crate bottom for the shelf material and planed it down a touch to match the thickness of the other two. I then cleaned up the front edge of one of the “original: shelves so it matched the other and the new.

After the repair and rework, I mixed and fiddled with 3 different stains I had to color match the original finish; I didn’t want the rosettes looking out of place. After touching-up all the dings and scrapes, I added an oil finish and 2 coats of wax. It only took 10 minutes or so to buff it up to a high shine.

I took it over to his wife Monday morning and she was thrilled at the transformation. The Talley motto (at least my house-hold) is “Be Helpful when you can” and I feel this qualifies. I am glad I could do this little thing for them and hope they continue to use it and pass it to their kids.

IMG_3444

IMG_3442

Rosettes for neighbor