Catching up and writing more

June 25, 2018 / Matt Talley / Leave a comment

I have not been writing as much in the last few months as I should. I have lots of excuses:

House Remodel
Hectic Work Schedule
Jeep Rebuild
A focus on film making and growing my YouTube presence
Lawn and Garden care – seriously, this takes up a lot of my time.
Too much TV and interwebs…
Blah, Blah, Blah…

When you get to the base of it all though, the answer is that I have made time for all the other things that keep me sane/make me crazy except for writing. I am renewing my focus and will be posting more words to go along with all of the pictures and video.

Let’s start with an update of current stuff:

The Attic

We are so close to being done with the attic conversion. I have to put a couple of coats on the closet door and one on the stair railing and paint the 4 walls with a couple coats of the almond eggshell that my wife picked out. The new hardwood flooring is being delivered today and it will be installed on Friday. I will spend the weekend installing the stair treads and kickers/risers. The receptacles, switches and lights are the last serious items that will go in before I touch-up a little paint here & there and I will be done and can focus on the basement.

Basement

We are 75% there. All tiled laid, grout done and a functioning toilet!! I need to finish the trim install, hang two doors and then paint EVERYTHING! I am having a custom shower rod TIG welded together and will be building the double sink vanity. I have to tack together & paint the medicine cabinet door and mirror frames as well. After all is in, we will have a plumber come out for the sink install and shower hook up. I don’t plumb. I am afraid of flooding my house with water or sewage. I leave that job to the professionals.

Main Level Bath

The tube tile surround is being replaced in two weeks with 6” subway and small hex tile. The new bathroom mirror will be going in this week, and I have to have the exhaust fan switch rewired.

Jeep

I had a solid weekend working on the Jeep. The taillights are installed, the winch is re-wired, mirrors installed, windshield back on with new gasket and PLENTY on extra silicone. The upper KC spotlights are re-installed, and an issue with the front speakers if fixed. I still need to paint and install the spare tire rack, as well as the CB, megaphone speaker, 2^nd battery, air compressor, lower KC spot lights, passenger headlight, rub rails, whip antenna, headlight trim rings, and polish the rear tube bumper.

The current plan is to leave the top COMPLETELY off until fall when I re-install the soft top. I need to finish the Hi-Lift Jack rebuild project, have the speedometer serviced, and replace my tube pads as well before the cold winter wind blows.

Garage

The shop of me dreams is packed full of everyone else’s crap right now. It is all leaving by the last weekend in July if I have to put it all out on the road. I need to finish wiring in my 40K lumens of LED lighting, a 50AMP plug, a couple of 220/30amp plugs and have an electrician connect all into my service panel.

House Exterior

Downspout in back needs attention
A section of soffit need looking at and possibly repaired
I need to weld together the Juliet Balcony outside the dining room
Weld railing for rear steps
The new front windows need a little trim and paint
Dining room window needs trim and paint
The rear steps need to be painted
The chimney needs to be repointed before fall/winter
Basement railing needs to be installed
Both front railings need to be sanded and repainted.
External security alarm siren need to be installed
A tiny bit of concrete need to be pouted
Two security cameras need to be swapped out for the lower profile ones

The yard

Man, the front yard is good, a little weeding and bush trimming maybe. The back yard though… It is still a disaster, or at least ½ a disaster. I want to fill 3-4 gabion baskets with all the rocks left over from a previous owner’s attempt at pond-scaping and make benches around out fire pit. We will be adding a steel arbor from the garage to the patio this fall that I am welding up on-site. The patio table and chairs will get a proper sanding and oiling this weekend and we need/want an umbrella of it this year. I want to add a tool shed and additional firewood racks to the side yard. And finally, the small yard next to the garage is my makeshift apiary and I would like to make that both permanent and presentable with some additional hives, gravel and flower plants in narrow garden boxes.

Health

Stamps-With-Foot, my mom, and the kids are good. I am feeling all of my 40+ years lately though. My hip is still painful a full year after reconstruction. I may have torn the meniscus in my left knee, AND I have Fucking Tennis elbow from chopping firewood!! Not being able to run and bike, coupled with my love of cookies, has left me with a classic “Dad-bod” and even my fat pants are tight right now. Eating better now. Trying to get between 7 and 10K steps in a day, having the knee looked at, and working on the elbow. We are going to Hawaii in February and I need at least a 2-pac as there will be MANY shirtless days in and under the water, for my arm to feel better, and my knee and hip to be like 70%.

Other

Work is work, but I have really traveled at all this year and that is awesome! Still wish I was building cabinets for a living, covered in man-glitter, smiling but that will have to wait. I will be traveling to Arkansas this fall to see my daughter and her family. My son will be here in Seattle for a couple of weeks this summer. I hope to tour a couple of colleges with him. My wife and I have a couple of road trips planned and I want to get out on my bike, kayak, and skate board a little (don’t tell my wife or knee Dr. about the board…) I have started recording for a monthly Podcast. A friend conned me into it after a few years of asking. I am going to just sit and tell stories without naming names or implicating myself in any illegal activities that are not past the statute of limitations. As a reward for losing weight I will go ahead and finish out both of my tattooed arm sleeves and my wife and I are planning matching bee tattoos for our anniversary. I still have not bought a boat or a motorcycle, so she will keep me for a while longer

The Jeep Rebuild After Paint

March 26, 2018 / Matt Talley / Leave a comment

As you know, I got the Jeep back from paint about a month ago and it has been sitting on the lift in the garage – letting the paint cure. I am not 100% happy with the paint… It took 4 tries for them to get the hood and fenders right and there are little spots and dings on the tailgate. There is also some mess just above the nerf bars and a run on the rear fender that makes me twitch, but they will be covered by some trim and the fender flairs, so… I included the Jeep’s homecoming in a video here, but skip to 5:09 as I spent way too much time blabbing about other non-Jeep related crap in the 1st part of the Video.

Anyway, I have been collecting small cardboard boxes full of goodies since last October for the after-paint re-fit. That installation process begins this coming weekend. I am giddy with anticipation.

The part additions and changes from Morris, Amazon, ARB, and Northridge4X4 include:

Duel Battery tray
Halogen headlight Lamp Conversion Kit (wanted LEDs, but don’t want to pay $600+ for headlight!!)
Black Rugged Ridge Fender Flare Kit
Stainless Fender Flair Hardware
Front Side Amber Marker Lights
New Wiper Blades
New thick rubber floor mats
BestTop Bikini Top (uses existing soft top channel) for the 2 months of sun in Seattle this summer
Rugged Ridge LED Tail Lights
Front Parking Lamp/Lens
Black Factor 55 FlatLink Winch Cable Shackle
Burnt Orange Jeep Fender Decals
New Frame to Cowl Weather Seal
Black Powder Coated Stainless Steel Side Mirrors
New Winch Cover
Warn Winch bumper with D-Rings
Black Vinyl Spare Tire Cover
New Aviation-Style Light Switches for front spots and reverse lights
Stainless Steel License Plate Holder (I had it powder coated black)
Second set of D-rings (Powder Coated Burnt Orange to match Jeep Logo)
Hi-Lift Jack Rebuild Kit (sandblasting and repainting origional)
Bronze Door Hinge Bushings (sourced at McMaster-Carr)
Warrior Pipe ½ doors (because I can)
ARB Recovery Tools Bag to organize my off-road gear
ARB Compact Onboard Air Compressor (Got a SMOKING Deal at the ARB booth at a recent Jeep Swap Meet!!)

Getting new bar covers made as well

Film Friday – An Update and a Little Ranting

February 9, 2018 / Matt Talley / Leave a comment

A quick update about why I have not posted here on my blog or been on YouTube for a few weeks and how I have been spending my time: Roadtrippin’, some slight ranting, obscene gestures, naughty words, snowboarding, beer, some boats, a little 3D printing, and a sneak peak at the Jeep’s homecoming after 12 weeks in the body shop are all to follow.

2018 News Year’s Resolutions:

January 1, 2018 / Matt Talley / 3 Comments

A year ago, to the day, I said that I would do a bunch of stuff in 2017. I did OK, but not great. I could blame it on my old man hip, the surgery, or the recovery time, but mostly not getting stuff on the list done was all me. All my own laziness, stuborness, or my A+ skill level of procrastination. These are the promises I made to myself that I kept:

~~Take a pottery class~~
~~Take a Blacksmithing class at the Pratt~~
~~Read 1 book every 2 weeks – minimum~~
~~Play my uke, banjo, and guitar with others~~
~~Give lots of $$ to Heifer and MFS~~
~~Make movies and post: Adventure, craftsmanship, and family.~~
~~Make Stuff!!~~
~~Ride my skateboard because I am not too old or too fat~~
~~Road trip in WA more~~
~~Take my wife on vacation~~
~~Plant a spring garden~~
~~Fix up the front and back yards~~

The following is what I am committing myself to do in 2018:

Organize my chaos in the shop and basement.
Sell, donate, recycle, or throw away shit that I do not use.
Use my planner and notebooks as tools not as something that I “have” to use.
Eat my veggies. Seriously. Salads in my future.
Take my desk at home back and make it a conducive writing space.
Cut WAY back on sugar and carb intake!
Lose weight – back to 175! and put on 5-7lbs of muscle
Go to the gym 3-4 time a week – minimum.
Box more at the gym and at home
Write more: Blog posts, REAL letters, Thank you notes, fiction, and non-fiction
Take more great pictures
~~Fly my drones more~~
Take at least a 45 minute lunch at least 4 days a week at work
Show up to yoga at least once a week
Take another pottery class
Finish my CJ-7 Jeep restoration
Look into getting back into the judo dojo
Sign up and compete in the Gambler 500 car race
~~Sign up for a letterpress class at SVC Downtown~~
Take another blacksmithing class at The Pratt
Read 1 book every 2 weeks!
Learn how to play the mandolin and banjo better!
Play my uke, banjo, and guitar with others
Build a skin-on-frame canoe for two
Road and mountain bike
Take the puppies to Lincoln Park for a walk at least once a week
Ride the living shit out of my Single -Speed
Bike to work at least 5 times this year (12 miles each way)
Volunteer more at the Center for Wooden Boats
Pay off all credit cards
Go sailing in Puget Sound
Turn some amazing and useful stuff on my lathe
Give lots of $$ to Heifer and MFS
Make at least 1 movie a week for YouTube and post: Adventure and craftsmanship
Monetize my YouTube account and increase my presence and standing in that community
Lessen my Twitter and social media activity…
See my kids and grandchildren more
Be involved in politics more: financally and with a time commitment
Work on my Genealogy database and organize all my info.
Finish the house remodel – even if I have to pay a contractor to do it (…shudder…)
Finish the garage/shop/GROP build
Make.More.Stuff!!
Ride my snowboard and skateboard because I am not too old or too fat
Road trip in WA and on West Coast more
Have two hives of healthy, happy bees
Kayak lots!
See my friends more
Take my wife on vacation
Plant a spring garden and have a really bountiful fall harvest
Have an awesome Griswald-like Christmas light display!

I am printing this list out and pasting copies in my notebook, work planner, in the shop, at my desk at work, on the fridge, and in the basement above my warranty voiding workbench.

Weekend in the shop

November 14, 2017 / Matt Talley / Leave a comment

I got some serious crap done in the garage and at home this weekend:

Cleaned, swept, and put away tools for over an hour Saturday morning
Added wheels to my screw-clamp stand
Built a hammer stand – I have a lot of hammers
Organized 4 drawers on my tool cabinet
Organized a drawer for just camera mounts and cables
Hung 22 small blue U-Line organization bins
Cleaned off table saw
Installed new table saw blade
Re-tensioned bandsaw
Cleaned off bench for 1st time in MONTHS!
Put all the miscellaneous screws, bolts, and hardware in the proper organization bin
Sanded the carcass for a bathroom cabinet installation
Moved some angle-iron into the metal storage rack
Carried 2 of the 3 cabinet sections in the house
Cranked on the lathe to reduce the diameter of a dowel
Blew 30 amp breaker
Said the f-word at least 3 times
Took a look and original electrician did not fully terminate one of the “hot” wire legs, which led to the failure.
Said dirty words
Drove to Home Depot and back for breaker
Swapped out a blown breaker
Ran 75 linier feet of 12-2 Romex wiring
Installed 12 electrical boxes
Only dropped 1 on my head/face
Installed a couple of runs of CAT-6 ethernet cable for the PoE camera system
Jesus, CAT-6 is expensive!!
Moved some firewood into the house
Built and installed butcher paper roll noteboard on a cabinet front
Re-set wall clock
Worked on chipping hammer re-build
Shot a couple of videos
Sanded a couple spots on the jeep under windshield
Wished I had a bathroom in the garage at 3 different points during the weekend
Started on pizza peel build for Father-in-law

Film Friday – Jeep Paint Prep

October 13, 2017 / Matt Talley / Leave a comment

…And so begins my plan for interweb domination… This is the 1st in a series of videos detailing my Jeep re-painting project. I am doing the prep work and getting ready for my 1986 CJ-7 to go into the shop for a little cosmetic make-over. It was painted black at the factory in Toledo, has been black ever since, and will stay black until they make something darker. I also give a little bit of an update to what I have been up to of late, some projects that are in the works, and a quick pan view of part of a dirty, disorganized, and cluttered shop.

Car Lift and Jeep CJ-7 Saga/Search/Information

July 21, 2017 / Matt Talley / Leave a comment

Before putting 4000 pounds of 31 year old Toledo steel above my head for the first time I really needed the correct locations for a 2-post-lift pad placement points on a CJ-7. I like who I am and I have some plans for the next 30 years or so and really didn’t not want to be that guy who squashed himself in his own garage. It happens.

I have seen two jeeps on their sides at dealerships after falling off lifts, countless other lift fails, and have seen CJs put up in the air at least four different ways. I have had a couple of cars in the air since building the garage, referencing their owner manuals for lift placement, but not the Jeep yet. Again, I didn’t want to be the guy that drops his 4X4 pride off the lift in his own garage. I started doing a little research and asking questions.

After a fairly fruitless internet Search, I called the company that built my lift (it is a Rotary Revolution RPT10) and they referred me to The American Lift Institute (ALI) manual that came with the lift. The 2016 version of the manual only goes back to 1991 for most vehicles and when I called them, there was no answer that they could give me. They referred me to “a local Jeep dealer.”

I dropped in the one nearest the house and there was not an “old-guy consensus” on how to life a CJ: on the frame behind the shackle mounts, on the shackles, on the spring plates, on the axles, etc… My Chilton and Hayes manuals have nothing and I am still trying to source a good 1986 Service Manual (can’t find anything in the downloaded ’82) and would love an original Owners manual. I went by a 4X4 shop a bit ago and the tech there said “lift it on the shackles…” and posed it as sort of a question. I walked away swiftly.

So, relying on Cunningham’s Law, I asked the internet via the JeepForum if anyone had some documentation on where to apply the lift arms/pads on a CJ-7 frame and where the balance point/center of gravity of the vehicle was to put in-line with the lift posts? I got some helpful suggestions and a couple answers that were on the edge of trolling, but the general consensus from CJ owners and mechanics on the forum was to follow the guidelines for the 1991 Jeep Wrangler and their frames, suspension, and balance points are very similar: The lift pads are placed under the frame (centered on the pads), directly adjacent to spring hangers/shackles. Sounded reasonable and plausible, so I decided to go with that. The balance point/CoG is between my dash and the bottom of the steering wheel and that point goes on center between the two posts of my symmetrical lift.

I went ahead a couple weekends ago and decided to put it up and do a little general maintenance. After everything checked out – raising the Jeep 6″ off the ground and giving it a serious shake on all 4 corners, raising it up and down a few times, I spent 30 minute for full oil and filter change. I lubed all the zert points on the drive-line and chassis while I was there. No squashing or falling Jeeps. 🙂

Weekend Activities

July 12, 2017 / Matt Talley / Leave a comment

Seattle is in early summer full bloom. The sun is out and the temperature is perfect! These conditions led to a really good weekend:

Slept had friends stay with us Friday night and Saturday morning
Big yummy breakfast
Picked three big bowls of ripe Lapin cherries
Ate a lot of cherries
Went over to my mother’s house
Took care of house projects for her
Had a yummy dinner
Nice bottle of red wine was opened and mostly consumed
Read American Gods aloud with Stamps-With-Foot before bed

Brunch with Friends
Went to the Sunday farmer’s market
Bought cheese and honey!
Went to the garden store
Bought a bunch of flowers for the yard
Walked the puppies
Planted flowers
Scattered weed&feed in the 1/3 of the back yard that is void of Ireland-green grass
scattered and raked grass seed.
Murdered dandelions
Picked up a mountain of puppy-made landmines 🙁
Mowed the yard
Installed new tire cover on Jeep spare
Put Jeep on the car lift – also now refereed to as “The Jeep Sex Swing”
Changed oil and filter
Only 42 more Oil Changes and the lift pays for itself!! 🙂
Lubed the chassis
Checked and topped off all the fluids
Made happy noises
Had a Coke and smile afterward while sitting in the shade
Printed out GAINT ’84-’86 Jeep Maintenance Manual
Let my internal OCD monster out to play
Custom labels and tabbed separators were made…
Added folders with Maintenance Manuals to shelf in the garage
Watered the garden, yard, and newly seeded dirt patch
More reading
Sleep

Going Topless

June 30, 2017 / Matt Talley / Leave a comment

I made a short film showing all the steps in removing the Hard Top from my 1986 CJ7 Jeep for the first time in 1.5 years. I couldn’t round up the help to pull it off, so I put on my thunking’ cap and used the lift. The garage is a MESS, but my excuse is that we are still remodeling the house and it has been a wet winter and spring so there are materials and projects in work everywhere.

My Week in Review

June 18, 2017 / Matt Talley / 3 Comments

This past week has been a week of mish-mash happenings:

90-day Post-surgery hip appointment: Could have gone better.
Fruit tree pruning
I built a lid for the compost boxes
A rat didn’t like my lid and chewed through the side to get at the worms in the compost bin
I said dirty words
Mounted 7 up-cycled cabinets in the garage
Finished painting 80 liner feet of 1/4 round trim.
Sweep and cleaned GROP
Organized some stuff into new shelves and cabinets.
Finished painting the corner shelf doors – 5 total coats of fresh paint
Installed the hinges and hung the doors on wrong cabinets
Said dirty words
Re-hung doors on the correct cabinet.
Scratched paint
More dirty words
Touched up paint
Finished corner cabinet install
Did some Physical Therapy for my Old Man hip
Mowed and edged the yard
Read a book
Made a few Instagram and Twitter posts
Amazon sent me a new tool!
Flew drone one afternoon after J-O-B
Planted the boxwood shrubs
Bought garden starts at Nursery: tomatoes, corn, squash, zucchini, peppers,herbs, lettuce, etc…
50+ hours at my J-O-B, hustlin’ to keep us fed and the lights on
Watched about 2 hours of NetFlix
Gave away a bed in our home office
Had to delver it to new owner
Drank some French wine
Worked on cedar log garden table
Bought couch/guest bed for the office/TV room
Braved the gauntlet at IKEA – three hours to pick up a pre-ordered couch 🙁
IKEA gave me a $50 discount for the trouble
Had to source clear glass Victorian-style pull knobs for the corner cabinet doors
Spoke to both of my children for Father’s Day
Heart Happy
Planted summer garden
There was some coffee drinking and puppy snuggling
Took top off of Jeep for the first time in 1.5 years
Started Raining the second I took it out of the Garage
Made grumpy noises
Had coffee and listened to a bluegrass jam session at favorite coffee shop
Watched a movie
Was prolific on Twitter and Instagram
Murdered some dandelions
Rode around neighborhood on errands in topless Jeep when it stopped raining
Made happy noises
Sent some J-O-B e-mails from home
Started reading American Gods out loud with my awesome wife
Went to bed to start it all over again on Monday morning

Film Friday – The Garage Build Film Part 2

May 12, 2017 / Matt Talley / Leave a comment

Below is Part 2 of a 3-Part series documenting our garage/shop build. Like Part 1, this film is made from pictures taken during the build with a voice over commentary. Part-3 will be a mix of videos, stills, and some drone shots.

There is a “hidden track” at the end…

Film Friday – The Garage Build Film Part 1

May 5, 2017 / Matt Talley / Leave a comment

I’ve had a number of people on various web forums, 6 sets of neighbors, a few friends, and a ton of folks in our area ask me some detailed questions about our garage build: size, foundation, demo, siding, wiring, roof, the car lift, etc… As I have been making some videos while rehabbing the hip, I thought that I would turn my garage build into a three part YouTube series to answer most of the questions and have all of the information documented in one spot. The first one is done and up now and the second should be done in a few weeks.

This one and the next are from pictures taken during the build, with a voice over. The third will be a mix of videos, stills and some drone shots. I learn something every single time I put a video or slide show together, so my hope is they get more and more watchable.

I didn’t have the time or facilities to do it in this video, but I would like to use my own guitar, banjo, ukulele, fiddle, and mandolin picking for the soundtrack on future videos. My son, brother-in-law, and any friends I can con into it will also be future soundtrack contributors.

Flying the Drone

April 17, 2017 / Matt Talley / Leave a comment

I have had a remote controlled camera mounted drone for about a year. I got it specifically for an airborne camera platform for taking stills and video of cool scenery and of me doing awesome stuff on my bikes, boards, boats, and jeep. The house remodel and garage build have gotten in the way of life and I haven’t filmed as much as I have wanted to. I have 7.5 total flight hours on the drone and am using it and thinking of novel ways to employ it a little more now that I am limited in my mobility with the hip rehab. I took it out last weekend, filming at the beach and this weekend, I got it in the air over my neighborhood on the first REALLY nice spring day.

I am a good little pilot and have my required FAA license, my aircraft is marked with my license number, I only fly where I am supposed to, stay under the 500’ ceiling, don’t go near airports, no flying over peoples’ homes, etc. I have had a few “concerned citizens” and tiger moms at the park get cranky about a drone over their heads, but I point to my prominently FAA license displayed on my case inner lid – printed at 300% larger than the original, cite the FAA and WA state statues calmly in an almost blasé manner without taking my eye off the drone. I have a bright yellow round “H” landing target, an airport flight-line safety-yellow parka, and a couple of small orange cones. I look legit, so I am left alone except for kids who linger hoping to see me crash it into the ground.

I plan to do a more and more filming with it this year, including a stint as the Team Zero FTG videographer for the 2017 Sea to Ski Race. I was originally going to compete in the kayak leg, but the hip said “NO!, not this year…” I also really want to get it out on a few hiking trails around Rainier, make an aerial film about West Seattle, use it to work on a mockumentary film I am piecing together about our dogs lives and how we are the ones that have been trained.

A couple of short snips of video that I have done recently:

Boat Lust

March 19, 2017 / Matt Talley / Leave a comment

So, you may or may not know this about me, but even though I currently own a couple of small boats, I have MAD Boat Lust. I am a member of the Center for Wooden Boats, I get Wooden Boat Magazine & Small Craft Adviser Magazine every month, go to the Lake Union, Seattle, Portland, and Port Townsend boat shows every year… I follow four sets of Blue Water sailors on YouTube, am trying to con my wife into taking a sailing vacation (I am getting a hard NO! on that one currently), and almost bought a used 22′ lead keel sailboat last summer for “my son.” I tried to sell it as his “learner Boat” and play up the father/son bonding time angle with it and my wife saw right through it. To date, however, I have not come home to tell my with that “We” just purchased an Amel 55 blue water sailboat, a 47′ diesel powered Cabin Cruiser, a Chris-Craft in need of some “light repair”, or a Hans Christian 33 kept in Bristol Fashion that “I” am planning to live on since said purchase would leave me homeless, devoid of my puppies, and divorced.

If my son, The Ruminator, lived in Seattle I wouldn’t mind a swing keel Columbia 22 or a Catalina 22 to gunk hole around the Sound in with him. A Catalina 270 LE would make my heart go pitter-patter as well, but I am a realist (-ish) and very aware of my current budget and available storage space. A sailboat that I would only use a few times a year and have to pay moorage on, would make me very unpopular at home. But, if someone has a 19′ WW Potter taking up space in their life that needs a new home, I would be game…

While what I WANT is a sweet little sailboat, what I NEED is a small outboard that that sits on a trailer in or beside the garage, that I can pop over to Blake or Vashion Island on, run up the Duwamish River a little piece, do a little salmon fishing on with my son or friends, haul a crab pot or three in season, find a secluded weekend beach for summer camping, etc… It needs to have a cuddy cabin to get out of the shifty weather here in Puget Sound, some storage space to keep gear dry, needs to be light enough to be pulled behind the jeep when fully loaded, and fast enough to handle the tidal flow in the PNW.

Buying a finished boat, even used, like a Ranger Tug 21, a C-Dory 19, or a Boston Whaler 21′ Cuddy are WAY out of my price range, I have been perusing Craigslist for a 16′ -21′ hardtops, but the ones I have found are either gold plated & upholstered in unicorn foreskin or needs to be sunk. So, in due course, I have been thinking about building the boat of need mentioned above. I know, I know… I have a shit ton of projects already with the shop and house, but I won’t start the boat until Stamps-With-Foot agrees that the house is good and all the little projects at home are squared away. Happy wife, happy life.

To digress a bit, my current home-built boat want is a Devlin Boats Dunlin 22 Cruiser with all the bells and whistles, but that too would be spendy, require me to quit my J-O-B to obsess over the details properly, I would have to rent out boathouse space for the duration of the build, have the time to build it, and would probably cause my sweet bride to up my life insurance just before “accidentally” pushing me into a wood chipper.

Back in reality, I am looking hard at building a couple of boats, including a Devlin Noddy 18. It is something realistic to build over the fall and winter, in the space I have available in the F-Bomb Garage, and within my current budget. Powered by a 4 stroke 50HP Honda or Yamaha, with homey little extras like: a sardine wood stove in the cabin, a crab pot winch arm on the stern, and lots of LED lights. Devlin Boat Works in just south of us in Olympia and in addition to being a design house, they are a boat works and build all manner of craft there at any given time. I sent a couple of e-mails and made some calls about the possibility of going down this summer if they have a Noddy or similar hull under construction. We will see if it can be arranged.

I will have to wait just lust a little while longer to satiate my boat lust…

Update: May 2017

Nope. Devlin is off the list. I can’t find anyone on the boat forums that has built the Noddy AND I have not had a single phone call or e-mail replied to. I don’t need to do business with someone who I have to beg to take my money.

My New Coffee Cup and Various Other Weekend Activities

January 16, 2017 / Matt Talley / 2 Comments

Stamps-With-Foot and I packed our weekend full of activities. The SCA was holding their 12th Night Celebration here in Seattle this year and far be it from us to miss a costume do. My wife went in a deep burgundy Tudor gown that she made and had to be sewn into for the occasion. Her snood (hair piece) and jewelry matched the dress as well. I was dressed as her man-servant. We sort of matched, but she sparkled – Lots of compliments on her dress and attire.

In addition to some serious people watching and taking in the fencing tournament, I spent some serious time at the merchant faire and picked up a tarboosh (Fez hat) for another costume event, a viking bearded axe, and a skull cup. You read that correctly. There is nothing like having your morning cup of Joe with a little cream and sugar, sipped delicately from the cranium of your enemy. There was a potter at the event selling ceramic, anatomically correct, skull mugs and my wife bought me one for my desk at work. It is the little things in life that make me the most happy.

In addition to 12th Night, we also:

Took down the Christmas tree
Rolled up the lights outside
Cleaned up the living room
Played with the puppies
I washed/scrubbed the road salt off the jeep and put it in the garage
Washed and vacuumed out my wife’s Subaru
Helped out a guy with a dead battery
He stole my jumper cables accidentally, then brought them back
Made breakfast for my mom
Had coffee in my new mug 🙂
Wrote a couple of letters
Cleaned up in the shop a little
Finished reading a book about bees
Had a great warm, long lasting fire
Cuddled
Watched Sherlock
Played Battlefield 1 with Dr. Brown
Started a new book

All and all, a good weekend away from my J-O-B.

2017 New Year’s Resolutions:

January 1, 2017 / Matt Talley / Leave a comment

Stuff I will do in 2017:

Eat my veggies
Lose weight – back to 175!
Go to the gym regularly
Box more
Write more: Blog, letters, notes, fiction, non-fiction
Take a lunch at least 4 days a week at work
Show up to yoga at least once a week
Take a pottery class
Take a Blacksmithing class at the Pratt
Read 1 book every 2 weeks – minimum
Play my uke, banjo, and guitar with others
build a skin-on-frame canoe
Run and bike
Start a guitar building class
Pay off all credit cards
Go Sailing
Give lots of $$ to Heifer and MFS
Make movies and post: Adventure, craftsmanship, and family.
Lessen my Social Media presence (Blog doesn’t count)
See my kids and granddaughter more
Be involved in popitics more: financally and time wise
Work on my Genealogy database a little
Finish the house remodel
Finish the garage/shop/GROP build
Make Stuff!!
Ride my skateboard because I am not too old or too fat
Road trip in WA more
Have two hives of healthy, happy bees
Kayak lots!
See my friends more
Take my wife on vacation
Plant a spring garden
Fix up the front and back yards
Climb more inside and outside
Have an awesome Griswald-like Christmas light display!

Jeep Trailer

April 28, 2016 / Matt Talley / Leave a comment

I have been posting a LOT about our remodel and garage build in the last couple of months, so I thought I would mix it up and post something not remodel related – mostly not related…

Simple and unassailable fact: A grown man needs access to a truck or a trailer. Since our move back to Seattle from France, I haven’t really had either and have been visiting U-haul for my hauling/dumping/moving/logistic needs, but that is getting both tedious and expensive. I finally bit the bullet and had a trailer made to match my CJ7 Jeep. I had it built because there wasn’t one available retail that matched what all I wanted to do with it – remodel work, hauling heavy loads of dirt and lawn debris, moving, climbing base camp set up, camping, SCA events, hauling firewood, etc. I also wanted a shorter and narrower trailer than the standard 5X8 utility trailer that you can find at the roadside truck and trailer dealers. I wanted it to both look good with the Jeep and I plan on hauling it places that a bigger trailer would be a hindrance so I took the opportunity to have a little customization done to get exactly what I want.

The specs for the new trailer are as follows:

4X6 tube steel frame with extended tongue
Wheel base to match the Jeep’s so that it will track in the same ruts off-road
6 lug 225 wheels with grease zerts right on the hub
Steel load-bearing fenders
More ground clearance than the Jeep for dodging stumps and rocks on trails
Long lasting LED brake and running lights
Spare tire mount
Treated wood bed with 6 D-Ring tie downs
3500lb rated axle, so I can load this thing up with dirt or concrete
Black hardened acrylic paint to match the Jeep
Swing rear gate that is also removable
Welded lip for ramp mounts
Swinging front wheel jack
High replaceable wood sides to match the lines on the jeep.
I will be adding:
1. Uni-strut interior rails on the sides and bed.
2. A triangular tongue tool/storage box.
3. Three Jerry can holders for gas and water on the outside.
4. One propane bottle holder for the grill/heater when camping
5. Load-bearing torsion box cover
6. Removable rack for carrying sheet goods and lumber