Tag: Re-Purpose

Cornebarrieu Bench – Redesign & first cuts made

/ Matt Talley / Leave a comment

I did a full redesign of the Cornebarrieu bench… As per my normal modus operandi, I was over designing/building it. With all the tweaks and gadgets and new parts, it was going to take me 6 months to build, some serious math to layout the interlocking joint angles and cost $1900 in material – I may have priced solid 4” thick seasoned Eastern European beech and walnut for the top and legs…
Anyway, I came to my senses and decided on using the pine I had already purchased for the legs and stretchers, lap joints with bolts instead of compound dovetails, a liberal amount of hide glue here and there, and a top made from re-purposed IKEA counter tops and will install a leg vice salvaged from a junk shop near Limoux, France instead of the $300 Benchcraft scissor vise that I was eyeballin’. The top will be solid all the way across instead of the split-top design.

The pine slabs have been drying in my GROP for 5 months and were ready to be cut down into their rough size. I had a little time this last weekend and spent 4 hours making all the leg and stretcher joint cuts – hogging out the material with successive circle-saw cuts and then chiseling them out. I am waiting to cut the tenon that fits into the top on each leg until I have the top in-hand. I chiseled and planed all the joint cuts smooth and I really wished I would have had a timber framing slick. When I do another bench or some large furniture with this type of joint anytime again, I will pick one up as it will pay for itself with the labor saved, in comparison to a 1.5” bench chisel, on 4 lap joints. I did the rough math and I think that I will have made 1023 total handsaw and circle saw cuts by the time the bench is done. There will be 16 bolts, 6 sections of 7/16” all-thread, 12 large screws, one 2’ ACME thread rod, 2 large dowels, 4 lag screws, 32 nuts & washers, and some sweat, blood, and curse words that will all go into it by the end. The new dimensions of the bench will be 25.5” wide, 34” tall, and 8.2 feet long. I believe the finished weight will be around 320 pounds.

My next milestone is the dreaded IKEA run. It will be a couple of weeks before I have the enough spending money horded together from my allowance (I want to be debt free in two years and retire at 55 so yes, I have an allowance…) and get the top cut out and fitted. I will update as I go.

Cornebarrieu Bench update (2)

Cornebarrieu Bench update (1)

bench drawings 2014 (3)

bench drawings 2014 top detail

Hall Tree and Shoe Rack for My Bride

/ Matt Talley / Leave a comment

Soon after we moved into La Maison du Talley in Seattle, my lovely bride decided that “we” needed a place to hang coats by the front door. I looked a little at coat racks and hall trees in the shops close to the house, but I just couldn’t stomach paying $250-300 for a semi-crappy coat rack that was the wrong color or wood for our house. I had one of those “light bulb” moments and decided to build one for us. Normally, I would have cut the raised panels (I tried to convince Stamps-With-Foot to let me do linen-fold panels) and added a little fancy trip work, but as I was recovering from shoulder surgery (#4), I decided to go with the re-use route. Second Use is a used hardware and reclaimed building material store in Seattle that I frequent and I cruised over for a used fir 6-panel door. Right away, I found the perfect one that set me back a whole $30. While pushing the cart loaded with the door to the front, I found a couple of cast off cabinet doors, a few odd sections of trim, and a bundle of old tongue & groove fir flooring. A plan formed in my little head…

I cut two feet from the top of the door, then flipped it over. I built a bench and shoe rack from the cabinet doors (raised panels turned in to match the adjacent hutch and the flat panel cabinets in the rest of the house) and attached it to what became the bottom of the door/hall tree. I ringed the top with a flooring plank, tongue down, and then applied some 100 year old left over fir crown molding on the top. The whole thing was sanded down and stained a deep red mahogany and finished off with 3 coats of exterior grade polyurethane.

For the hooks, I sourced a set of coat and helmet hooks from an old Seattle firehouse and small round dog leash hooks from Rejuvenation Hardware. When all was said and done, this was the very first project finished for our home in Seattle, I spent a total of $94, and I wrote a little love note to Stamps-With-Foot on the top of it. My little wife was giddy when I brought it into the house and she raved to friends for weeks about handy and awesome her husband was – made me puff out my chest like a Banty rooster.

If I did this again, the only thing I would change would be to make the shoe shelves movable as they are about 1/4″ too narrow for my running shoes, but perfect for her shoes, which I guess is the most important feature.