Kitchen Island – Update

May 20, 2015 / Matt Talley / Leave a comment

It has been almost a year since I built (with help from The Ruminator) Stamps-With-Foot a kitchen island and she has loved it (so I am told) and used the bejesus out of it. I made a couple of additions and there are a a few observations:

The wood I used as the base platform shelf was REALLY wet and I put 1/16″ spacing between the boards. WAY too much. I should have wedged them in as tight as possible because they have shrunk and now I have 1/8 gaps in a couple of places. No big deal since it is tongue and groove, but I don’t like spacing that large.
I installed an Arkansas Razorbacks bottle opener on one of the legs. It was required.
I had used a hunk of cherry tree trunk/firewood and turned it down as a lid/plug for the scrap hole. I turned it too large since it was really wet and was bound to shrink/warp/crack. My best guess is that it is done moving, so I put it back on the lathe and turned it down to size and changed the profile a little.
The rolling pin is a great towel holder, but I should have/need to stop it from rolling – the towel slips off and onto the floor occasionally.
I also originally finished the plug with walnut oil, but it gets handled a lot by wet hands and I had to oil it every couple of weeks. This time I finished it with 3 coats outdoor polyurethane and then added a coat of wax.

Making stuff with My Son

August 25, 2014 / Matt Talley / Leave a comment

It is one of my duties in this life to make sure that my children can do for themselves. Having to call a plumber for a clogged drain or an electrician to replace a switch just is not the Talley way. We are fixers, tinkers, builders, and warranty voiders by practice and nature. I cannot have it on my conscience that such a path would end with me, so part of the summertime ritual is to fix and build stuff.

This year was no different. The Ruminator work on the lathe a bit, helped me build a kitchen island, and helped design and construct a hanging shelf system for my wife’s sewing room. We hung a storage rack in the garage, built a snowboard rack for his room, hung stuff up in the living room, applied a little spray paint and finish, learned about milk paint, refurbished a miter-box saw, cut up some andirons, went over tool identification, sunk a bunch of screws, put some all-thread to use, made sparks with the grinder, and that sort of thing.

Just little bits at a time… Next year we will do a little metal work and wood carving. The year after, we might build a deck and do a little welding. At some point he will learn to sew and mend a little – not to be a seamstress, but enough to make simple stuff and put a button back on a coat. If he wants to be a carpenter or a cobbler or a tailor or a machinist or a welder fine, then I am equipping him with early skills to build from. But if he wants to be an architect, teacher, engineer, lawyer, doctor, or whatever – I still want him to have the knowledge base of how things work, how they are put together, and how they should be fixed.

UPDATE: Shortly after my son left to go back home, I was cleaning up the GROP and I found this message below written in saw dust. It made me both humble and very proud.

Chopping Block Kitchen Island – IKEA Hack

July 10, 2014 / Matt Talley / 2 Comments

Stamps-With_Foot has wanted a chopping block island for years. Our kitchen in Seattle just didn’t have the room for one, but the kitchen in France was PLENTY big enough. I looked into taking some 5/4 maple and gluing it up for her, but without a table saw and a power planer it would have been REALLY difficult. We found a couple that were already built, but they were between 400 and 900 Euros. No.Thank.You. After some deliberation, I decided on an IKEA island – the Groland. Stop Laughing and put down the stones…

While my son (The Ruminator) was here in France on his summer vacation, we bought one in a box, strapped it to the top of the car, drug it home, and started putting it together. I couldn’t leave it stock though, that is just not how I operate 🙂 We added a few flourishes to make it “better.”

1. Turned the legs on the lathe to give it bun feet
2. Glued it all together and added some extra dowels for reinforcement
3. Removed the steel rods on the original and plugged the holes with Dowels
4. Painted the base with a Sea Green Milk Paint
5. Added an additional block section to the bottom of the top panel – to make it super-solid
6. Cut a 6″ hole in the top for sweeping scraps off the work surface
7. Put a large plastic bin – removable from both sides – under scrap hole
8. Bolted rolling pin to one side to towels and placed 2 brass hooks on the other side
9. Scrapped the wood lattice bottom panel and used 7/8″ tongue and groove clear pine decking boards instead.
10. Polyurethaned the top – 5 coats – and bottom shelf so they match and make the painted base “pop”
11. Took a hunk of cherry tree trunk and turned it down as a lid for the scrap hole.

My Son and I had it installed just in time for my chef Father-in-Law, The Chatty Buddha, to visit and whip up a few fine meals using it as a work platform

Campaign Furniture Love and Build

August 17, 2013 / Matt Talley / 1 Comment

I am a sucker for campaign furniture – the real stuff not the 1970’s MDF, lime green crap with cheapo plated straps and corners applied. Nope, I am talking about furniture that could have been broken down and loaded in a wagon, put on a mule, or strapped to a camel and toted around the world to reside in an officer’s tent in the high mountains of the Hindu Kush, the plains of the Ganges, or on the savannas of the Rift Valley. There is a single modern volume – now out of print – that I have checked out of the local library (through inter-library loan) 4 times and have scanned it in it’s entirety. I also have a 19th century catalog that is printed on pulp paper and completely falling apart that I peruse a good bit. I have even planned a couple of days off while traveling around seeing particular pieces and collections: there is a small shop in the Charleston, SC antique district that I spent hours in and while in London last year I found a shop that I wanted to move into. To tempt me even more, I have read rumors that Chris Schwartz, author of The Anarchist’s Tool Chest, is working on a new book and I am vibrating with anticipation.

There is a bit of both romance and leisurely comfort when one spends time afield surrounded by real furniture. I have a couple of original pieces, but they were dear enough that they cannot leave the house and won’t be spending any time glamping with us in the summer or in a high-country elk camp. Instead, I have been working on some modern versions that can be thrown in the back of a truck, hauled at high speed down goat trails, and opened up like Optimus Prime to reveal stout, useful, pleasing furniture. I have a source for solid wood shipping crates of different sizes that I have cut, stained, altered, and added to for this purpose. The limiting factor in all of this, is that every single piece has to break down, or fold up so that everything together fits in the bed of a small truck: 4’X6′

Right now, I have the cast iron cookware box, a candle box, 2 small tables, and a field desk done. I am 90% done with the wet bar (you NEED booze while glamping…) and an oil lamp/lantern box. The camp kitchen is in work, but will not be near complete or usable by the time we move. I have also designed a linen trunk, small chest of drawers, and a full-sized bed, but these haven’t even been started. The Campaign Furniture build is an on-going task and I hope to finish it all while we are in France. We are actually contemplating using it to furnish our guest room there.

New Bench Chisels

July 17, 2013 / Matt Talley / Leave a comment

The bottom chisel (originally my grandfather’s) is the only one I have left from my shop getting burgled/cleaned out over a year ago. I have saved my pennies and dimes for a while and two days ago I bought a set of Stanley Sweet Hearts. I mortised the hinges into the kitchen cabinet doors I am building for my wife. Having quality tools makes me happy.

Kitchen Cabinet Build and Remodel

October 7, 2012 / Matt Talley / Leave a comment

When looking at the house that we now live in the one room that had us on the fence was the kitchen. it had original cabinets, but it was dark, dated, there were no outlets, and one wall was just a hodge-podge of appliances. I have spent the better part of my very limited free time trying to fix those issues. I have added a dishwasher, a knife rack, lots of paint, cranberry glass handles/pulls, outlets, pullouts, switches, a microwave, under cabinet lighting, build drawer organizers and am in the process of finishing hand made, period and house perfect cabinets for what was the ugly wall. It has been a very long and laborious process. I would never be this detailed in a house I was building for someone else – I would lose money.

Below is a gallery of the progress up until this point:

Ignoring the yard and building stuff

April 23, 2012 / Matt Talley / Leave a comment

Horror of horrors, I did not touch my yard this weekend. My lush, Ireland-green grass (I am a wee bit narcissistic about my grass) was left to grow and stretch toward the sky in the weekend sunshine. I spent all available daylight hours outside and didn’t even attempt to take the mower out, turn the compost, or battle with my creeping nemesis – the dandelions. Stamps-With-Foot did a little weeding on Saturday, but the bulk of our weekend was committed to getting the kitchen cabinets done enough so that we could do a test fit and install.

Success! My wife was a priming and painting machine: taking care of the microwave cabinet, the lowers, and the drawers. The lower cabinets were positioned into place and their rock-maple tops fitted (waiting on the drawer fronts and pulls to be finished). I cut all the frames for the doors, assembled the fridge cabinet, installed it with my wife holding the thing up in the air (hehehe), tacked together the trash/recycling slider, and cut the shelves for the microwave cabinet. When completely done, our cabinet space will increase by more than a third, will include al the latest and coolest amenities (slides, organizers, spice racks, pullouts, etc…), and the new cabinets completely match the original 1928 built-ins, both in construction and style.

I need to finish the fridge top cabinet, install the drawers, add a corner cookbook shelf, tack up cove-crown around all, and one final coat of paint. SOMEDAY, this will all be finished and we will have the most awesomest kitchen a tiny, period appropriate, craftsman house can have!

I added a pic of Brodie lounging in the sunshine, just because.

Stamps-With-Foot’s Kitchen Stool

January 7, 2012 / Matt Talley / Leave a comment

Like what seems to be half the Western world, we have a stool from IKEA. The natural finish/unfinish did not fit into our life and kitchen, so I decided to stain and finish it as per her wishes. you can see the before and After below:

Driven Outside

Tag: Kitchen