A giant sealed dome over our place would solve most of this….

There are some days where I want to just drop everything I am holding, turn off the lights, lock the door, and go on an extended vacation involving a sugar-sand beach and copious amounts of fruit laden alcohol.  This Saturday was one of those days.

I decided to work on the kitchen cabinet doors, cut some plywood sheets down, and tackle a bench top while the sun was shining.  I opened the shop, brought out a plastic truck-bed toolbox to cut on (my 4 sawhorses are currently being used elsewhere), pulled 3 full-sized sheets of ¾” and ½” plywood out of the lumber rack and drug it all out into the backyard.  After marking the first sheet, adjusting my saw blade depth, lining up my rip fence, and checking for clearance – I started my first cut and immediately ripped a 6” long kerf-cut into the top of the tool box that the sheet was sitting on.  Dammit! I cut the rest of the plywood up without incident, but grumbled thinking about the mistake (I will fill and patch it with molten P-Tex plastic at some later point).  After stacking all the assorted pieces of ply back into my cluttered shop, I man-handled the 170+ pound beech and maple in-work bench top from the basement and placed it on the now-damaged toolbox – trying very hard not to either herniate a disk in my bask or tear what is left of my shoulder.

My Shop/Garage is pilled deep and high with lumber, hardware, undone winter projects, wood shavings, tools, sawdust,  flotsam & jetsam, etc….  I spent an hour trying to set up my router and in all the clutter and mess I couldn’t find a ¼” collet for one router and the other does not have an integrated fence, so using my big monkey brain, I improvised a fence.  All I really wanted to do with the top was to route channels for t-track and thoroughly sand it down before taking the beast back into the bowels of the basement to apply stain and a tung oil finish.  All was going as planned and my first cut was perfect.  The second cut went just the same, but at the very end of the third cut my improvised fence failed and the router wobbled – gouging the top that I had spent a month building.  Jesus H. Christ I was pissed! – Mostly at myself, but there was some vitriol left over for the machine in my hands.  I said dirty, hateful, vile things while resetting the fence and making an adjusted cut.  I moved on to make my last cut in the very front lip of the bench and while the fence held, I stood up mid-way through the pass and the router wobbled, making the bit chew into a section of wood where I did not want it to go.  I gritted through the rest of the pass and finished the cut, but the second I was clear of the wood, I wanted to throw the still running router on the ground and beat the electric life out of it with the pruning shears that were leaning against the garage wall.  I had to walk away, hand over my mouth, and just breathed deeply with my back to the offending router, my own incompetence, and the damage they had both wrought.  My moment of reflection was short lived because just as I turned, I felt the first drop of rain fall from what was minutes ago a blue sky that had ominously darkened while I was focused on my router-rage (I swear it happened just like that – strait out of a hip urban dramedy…).  SHIT!!  I ran for something to cover the bench top.  The only thing I could find was a pink tent fly and a sheet of cardboard.  I covered everything and retreated into the shop, right eye twitching with disbelief/confusion/anger.  I spent the next hour drinking coffee laced with sawdust and moving piles of crap around in my shop.

When my sweet wife got home she MAY have found me in the shop muttering to myself, pacing, covered in saw dust, contemplating the logistics of building a giant sealed dome over our entire lot.  She talked me off the ledge, helped me put the top back into the basement, patted me a little, told me I was pretty and smart and a good boy, put me in some fresh, sawdust free clothes, and took me out to see a movie.

I got up the next morning and after a yummy breakfast of flaky croissants, bacon, eggs and two cups of coffee, I went downstairs and chiseled out the offending screw-ups, then cut and glued maple patches in.   After calming down some and after a good night’s sleep, I felt better about the whole thing, but me and that router are still not on speaking terms.

Cafe Table Refinish/Resale

I sort of inherited/acquired a beat up wood and iron cafe table set this summer.  While working on some other projects that I took some time and refinished both the table and chairs: sanding, adding some stain, and finishing it all with three coats of sprayed outdoor spar varnish.  I dropped the set off a a local consignment shop and it sold after a couple of weeks.  I was able to make about $95 after paying for the supplies that I used and the shop’s fee.  I put the money toward a a utility bill that wasn’t ours, but that we ended up responsible for.

In my head, a nice trendy couple will have coffee and croissants every Saturday morning on the porch or patio of their starter home, sitting at that little table for years to come….