Anarchist’s Tool Chest – Driven Outside

Last spring (2013), I was at the West Seattle Fruit Market and asked if I could snag an oak pallet that was sticking out of their dumpster. “No worries. Sure. Take whatever.” When I pulled out the pallet, I found an old trunk/chest under it that had the top ripped off and was in sad shape. I almost left it where it was, but then decided it would be good for tool storage in the shop as the top was under the box and all the pieces were there. I drug it all home and after I cleaned some old lettuce and a rotten beet out, stuck the thing under a wing of the table saw where it promptly started collecting sawdust.

While working on my own version of the Anarchist’s Tool Chest a few months later, I decided to fix the found trunk up as well. It took maybe a total of 2 hours was strait forward:

Vacuum job
Removal of the old bent and broken hardware
old hinges from some other scavenged project installed
Top refitted and put on
a little glue was applied to some trim
1″X4″ slats to reinforce the bottom…
A few well-placed screws
From the pieces of left-over pallet wood found on the same day, I glued up some 5″ blocks and turned them down to make bun feet.
Installation of the new feet
a quick light all-over sanding
Two coats of Teak tinted tung oil.
….and done…

Stamps-With-Foot saw it up on saw horses in the yard and claimed it for the house. Apparently, it was too “rustic & French & crafty” to be vanquished to warrens of my dark little shop to be abused with tools, dirt, dust, grease and boyness. When I first started putting it back together, I found stained receipt from a outdoor store (no date) and a cub scout pin wedged in the bottom. I surmised that this was a young man’s camping/scouting trunk that he or his dad or both built it together. From the construction and the materials used, it looks like it was put made in the late ’40’s or early 1950’s. It now sits in our living room in the south of France and serves as a coffee table and blanket/hammock storage chest.

We/I have some serious work to do before we move to France for two years and we have a list of stuff that needs to happen. Here is the initial “to-do” post:

The Lawn:
The Nana is going to be moving into our house and will be puttering around the yard, planting flowers and the like, but there is no way that she will be pruning trees, cutting the lawn, weed eating, edging, or pulling pine needles out of the gutters. There is a little time, so we have contracted a crew to start taking are of the lawn now so that any kinks will be worked out.

In the spirit of full disclosure, the timing of this yard work transition was set into full motion only when my lawnmower blew up. Really, really – kaboom! As in there was a silver dollar-sized hole in the side of the piston housing and oil spewed everywhere. Right up until that moment the lawn caed transition was just a good idea. After it died, I threw it in the back of the truck, so it wouldn’t leak anymore oil on my grass and called the lawn service. There were a couple of things after their 1st visit, that I would like done differently, but on the whole, so far so good.

Projects:
The Kitchen HAS TO BE COMPLETED. I have stopped working on my Basement of Doom, the Campaign Camping Furniture, wood turning and a couple of refinish projects until the kitchen is complete. I will work down from there and not take on ANY new projects. I have two chests of drawers and a Duncan Phyfe Table that I want to complete and sell so that I am not storing them.

Shop:
I hate my table saw. I am going to out the beast on Craig’s List along with my contractor’s saw (Just collects spiders and sawdust), 12″ band-saw, small joiner, small drill press and the miter-box saw. None of them will work in France (50Hz vs. 60Hz power issues), so I can’t take’em with me. They are all old and have had a good life with me. It is time that I pass them on to new homes where they will see less use and live out their golden years making soapbox derby cars and bird feeders. I am planning to use any money made to invest in both some quality carving chisels and I will save part for the down payment on all new, cabinet shop-quality, power tools when we return to the US.

I can’t not build stuff, so I am taking the Anarchist’s Tool Chest route and am taking a rebuilt an old ammo/tool box (see evolution in pictures below) into a more useful tool travel case and will then show up in France with planes (22 of them), carving knives, mallets, hand saws, chisels, etc… The plan is to make smaller more detailed items, mostly by hand, while I am there (I will be sourcing a lathe and doing some bowl work though…).

Driven Outside

Tag: Anarchist’s Tool Chest

Found Trunk

Getting ready for our move to France – first round